Author Index
A
  • Aboonajmi, Mohammad Design, Evaluation and Construction of a Test Rig For Predicting the Remaining Usefull Life of a Gearbox with a Spur Gear [Volume 3, Issue 2, 2025, Pages 33-46]
  • Afradi, Alireza Numerical Simulation of the Effect of Conventional and Hybrid Nanofluids on the Cooling Performance of Automobile Radiator [Volume 3, Issue 2, 2025, Pages 137-151]
  • Aliakbari, Karim Determination of Orthotropic Elastic Properties and Study of Size Effect of Single-Layer and Double-Layer Graphene Nanoplates Using Atomic Finite Element Method [Volume 3, Issue 2, 2025, Pages 99-117]
  • Alizadeh, Ali Fabrication and Investigation of Mechanical Properties of Copper Alloy Matrix Composite Reinforced with Micron Diamond Particles [Volume 3, Issue 1, 2024, Pages 117-132]
  • Alizadeh, Ali Preparation of Al-B4C Composite by Mechanical Alloying Method and Investigation of Its Thermomechanical Properties [Volume 3, Issue 1, 2024, Pages 163-183]
  • Amiri, Mina Determination of Orthotropic Elastic Properties and Study of Size Effect of Single-Layer and Double-Layer Graphene Nanoplates Using Atomic Finite Element Method [Volume 3, Issue 2, 2025, Pages 99-117]
  • Amiri Atashgah, mohammadali Finding the Optimal Position of the Distance Measuring Device with the Aim of Reducing Risk and Uncertainty in the Aircraft Landing Phase [Volume 3, Issue 1, 2024, Pages 227-238]
  • Azimpoor Shishevan, Farzin Experimental Analysis of the Impact of Fuel Pressure and Filter Clogging on the Spray Rate of Automotive Fuel Injectors [Volume 3, Issue 2, 2025, Pages 69-79]
  • Azizi, Diyar Effect of Elliptical Cylinder Arrangement on Turbulent Flow and Heat Transfer in Horizontal Channels [Volume 3, Issue 1, 2024, Pages 73-92]
B
  • Babaei, Reza Investigating the effect of environmental conditions and fuel type on the energy and exergy parameters of a steam power plant [Volume 3, Issue 2, 2025, Pages 19-32]
  • Babaei, Reza Numerical Simulation of the Effect of Conventional and Hybrid Nanofluids on the Cooling Performance of Automobile Radiator [Volume 3, Issue 2, 2025, Pages 137-151]
  • Bagheri, Mohammadamin Design and Construction of a Two-Axis Angle Control Testbed with a Hardware-in-the-Loop Approach [Volume 3, Issue 1, 2024, Pages 147-161]
  • Bohlouri, Vahid Design and Construction of a Two-Axis Angle Control Testbed with a Hardware-in-the-Loop Approach [Volume 3, Issue 1, 2024, Pages 147-161]
D
  • Dastorani, Sadegh Design and Simulation of Polycationic Nano-Linkers for Connecting Polyanions Together [Volume 3, Issue 2, 2025, Pages 193-211]
E
  • Eskandari Jam, Jafar Fabrication and Investigation of Mechanical Properties of Copper Alloy Matrix Composite Reinforced with Micron Diamond Particles [Volume 3, Issue 1, 2024, Pages 117-132]
  • Eskandari Jam, Jafar Numerical and Experimental Investigations of the Response of Foam-Filled Aluminum Square Profile Under Lateral and Axial Impact [Volume 3, Issue 1, 2024, Pages 23-42]
  • Eskandari Jam, Jafar Preparation of Al-B4C Composite by Mechanical Alloying Method and Investigation of Its Thermomechanical Properties [Volume 3, Issue 1, 2024, Pages 163-183]
F
  • Faraji, Nikoo Performance Enhancement of Photovoltaic-Thermal Panel Using Hybrid Nanofluids [Volume 3, Issue 2, 2025, Pages 47-67]
  • Fathi, Morteza Experimental Investigation of the Effect of Fuel Injection Timing on the Combustion Regime of the Direct-Injection Internal Combustion Engine – Transition from Conventional Compression Ignition Combustion to Low Temperature Combustion [Volume 3, Issue 1, 2024, Pages 133-146]
G
  • Ghaderi, Seyed Mohammad Reza Numerical and Experimental Investigations of the Response of Foam-Filled Aluminum Square Profile Under Lateral and Axial Impact [Volume 3, Issue 1, 2024, Pages 23-42]
  • Ghafari, Esmaeel Design and Construction of a Two-Axis Angle Control Testbed with a Hardware-in-the-Loop Approach [Volume 3, Issue 1, 2024, Pages 147-161]
  • Ghasemi Asl, Ramin Effect of Elliptical Cylinder Arrangement on Turbulent Flow and Heat Transfer in Horizontal Channels [Volume 3, Issue 1, 2024, Pages 73-92]
H
  • Hasanzadeh Ghasemi, Reza Design and Simulation of Polycationic Nano-Linkers for Connecting Polyanions Together [Volume 3, Issue 2, 2025, Pages 193-211]
  • Hassan beygi, Seyed Reza Design, Evaluation and Construction of a Test Rig For Predicting the Remaining Usefull Life of a Gearbox with a Spur Gear [Volume 3, Issue 2, 2025, Pages 33-46]
  • Hassani, Ali Experimental Study on Bending Fatigue of 3D-Printed Specimens Fabricated via Fused Deposition Modeling [Volume 3, Issue 2, 2025, Pages 119-136]
  • Heydari Beni, Mohsen Fabrication and Investigation of Mechanical Properties of Copper Alloy Matrix Composite Reinforced with Micron Diamond Particles [Volume 3, Issue 1, 2024, Pages 117-132]
  • Heydari Beni, Mohsen Numerical and Experimental Investigations of the Response of Foam-Filled Aluminum Square Profile Under Lateral and Axial Impact [Volume 3, Issue 1, 2024, Pages 23-42]
  • Heydari Beni, Mohsen Preparation of Al-B4C Composite by Mechanical Alloying Method and Investigation of Its Thermomechanical Properties [Volume 3, Issue 1, 2024, Pages 163-183]
J
  • Jafari, Akbar Determination of Orthotropic Elastic Properties and Study of Size Effect of Single-Layer and Double-Layer Graphene Nanoplates Using Atomic Finite Element Method [Volume 3, Issue 2, 2025, Pages 99-117]
  • Jafari Vardanjani, Mehdi Analytical Evaluation of 2-stage Pusher Centrifuge Dynamic Performance [Volume 3, Issue 1, 2024, Pages 93-115]
  • Javadi, Seyed Mohammad Numerical Study of the Effect of Peak Cooler Structure on Airflow and Efficiency of Dry Cooling Tower [Volume 3, Issue 2, 2025, Pages 173-191]
K
  • Khanchoupan, Milad Investigating the effect of environmental conditions and fuel type on the energy and exergy parameters of a steam power plant [Volume 3, Issue 2, 2025, Pages 19-32]
  • Khanchoupan, Milad Numerical Simulation of the Effect of Conventional and Hybrid Nanofluids on the Cooling Performance of Automobile Radiator [Volume 3, Issue 2, 2025, Pages 137-151]
  • Kiamansouri, Mohsen Investigating the effect of environmental conditions and fuel type on the energy and exergy parameters of a steam power plant [Volume 3, Issue 2, 2025, Pages 19-32]
  • Kochakinejad, Ali Investigating the effect of spark plug and wire health on gasoline engine exhaust emissions [Volume 3, Issue 2, 2025, Pages 7-18]
  • Kousari, Amirreza Finding the Optimal Position of the Distance Measuring Device with the Aim of Reducing Risk and Uncertainty in the Aircraft Landing Phase [Volume 3, Issue 1, 2024, Pages 227-238]
L
  • Lotfian, Masoud Preparation of Al-B4C Composite by Mechanical Alloying Method and Investigation of Its Thermomechanical Properties [Volume 3, Issue 1, 2024, Pages 163-183]
M
  • Mahmoudi, Meysam Investigating the effect of environmental conditions and fuel type on the energy and exergy parameters of a steam power plant [Volume 3, Issue 2, 2025, Pages 19-32]
  • Malekzadeh, Mehrdad Effect of Elliptical Cylinder Arrangement on Turbulent Flow and Heat Transfer in Horizontal Channels [Volume 3, Issue 1, 2024, Pages 73-92]
  • Mamourian, Mojtaba The Effect of Aluminum Porous Network Characteristics on the Complete Melting Time of Coconut Oil and the Temperature Uniformity of the Wall [Volume 3, Issue 2, 2025, Pages 153-172]
  • Masoumnezhad, Mojtaba Feasibility Study of Natural Ventilation Potential of Residential Buildings for Different Climates in Iran [Volume 3, Issue 1, 2024, Pages 185-206]
  • Mazidi Sharfabadi, Mohammad Performance Enhancement of Photovoltaic-Thermal Panel Using Hybrid Nanofluids [Volume 3, Issue 2, 2025, Pages 47-67]
  • Mehrabi Gohari, Ehsan Numerical Analysis of the Effect of Rake Angle on Hydrodynamic and Hydroacoustic Performance of DTMB Marine Propeller [Volume 3, Issue 2, 2025, Pages 81-98]
  • Miri, Seyede Mohadeseh A Review on the Various Solutions to Improve the Performance of the Solar Collector Absorber Tube by Using Turbulator and Hybrid Nanofluid [Volume 3, Issue 1, 2024, Pages 43-72]
  • Moghadamnia, Elham Investigating the effect of environmental conditions and fuel type on the energy and exergy parameters of a steam power plant [Volume 3, Issue 2, 2025, Pages 19-32]
  • Moghiman, Mohammad The Effect of Aluminum Porous Network Characteristics on the Complete Melting Time of Coconut Oil and the Temperature Uniformity of the Wall [Volume 3, Issue 2, 2025, Pages 153-172]
  • Mojtaba, Masoumnezhad Investigating the effect of spark plug and wire health on gasoline engine exhaust emissions [Volume 3, Issue 2, 2025, Pages 7-18]
  • Moosavian, Seyed Ashkan Design, Evaluation and Construction of a Test Rig For Predicting the Remaining Usefull Life of a Gearbox with a Spur Gear [Volume 3, Issue 2, 2025, Pages 33-46]
  • Moradi Rad, Masoud Finding the Optimal Position of the Distance Measuring Device with the Aim of Reducing Risk and Uncertainty in the Aircraft Landing Phase [Volume 3, Issue 1, 2024, Pages 227-238]
N
  • Naghedifar, Seyyed Ali The Effect of Aluminum Porous Network Characteristics on the Complete Melting Time of Coconut Oil and the Temperature Uniformity of the Wall [Volume 3, Issue 2, 2025, Pages 153-172]
  • Niajalili, Mehdi Investigating the effect of spark plug and wire health on gasoline engine exhaust emissions [Volume 3, Issue 2, 2025, Pages 7-18]
P
  • Pirali, Pooya Numerical and Experimental Investigations of the Response of Foam-Filled Aluminum Square Profile Under Lateral and Axial Impact [Volume 3, Issue 1, 2024, Pages 23-42]
Q
  • Qaedsharaf, MohammadHussein Numerical Analysis of the Effect of Rake Angle on Hydrodynamic and Hydroacoustic Performance of DTMB Marine Propeller [Volume 3, Issue 2, 2025, Pages 81-98]
R
  • Rahimi Asiabaraki, Hossein Experimental Analysis of the Impact of Fuel Pressure and Filter Clogging on the Spray Rate of Automotive Fuel Injectors [Volume 3, Issue 2, 2025, Pages 69-79]
  • Rahmatinejad, Bahman Experimental Analysis of the Impact of Fuel Pressure and Filter Clogging on the Spray Rate of Automotive Fuel Injectors [Volume 3, Issue 2, 2025, Pages 69-79]
  • Ranjbar, MohammadAli Numerical Analysis of the Effect of Rake Angle on Hydrodynamic and Hydroacoustic Performance of DTMB Marine Propeller [Volume 3, Issue 2, 2025, Pages 81-98]
  • Rezaei, Sobhan Investigating the effect of spark plug and wire health on gasoline engine exhaust emissions [Volume 3, Issue 2, 2025, Pages 7-18]
  • Rouhi, Saeed Determination of Orthotropic Elastic Properties and Study of Size Effect of Single-Layer and Double-Layer Graphene Nanoplates Using Atomic Finite Element Method [Volume 3, Issue 2, 2025, Pages 99-117]
S
  • Shafiey Dehaj, mohammad Thermodynamic, Economic and Optimization Analysis of a New Geothermal Energy-Based Multiple Generation System for Hot Water, Cooling, Power and Liquid Hydrogen Production [Volume 3, Issue 1, 2024, Pages 207-225]
  • Shariati, Mahmoud Design and Simulation of Polycationic Nano-Linkers for Connecting Polyanions Together [Volume 3, Issue 2, 2025, Pages 193-211]
  • Soltani Bidar, Ramin Fabrication and Investigation of Mechanical Properties of Copper Alloy Matrix Composite Reinforced with Micron Diamond Particles [Volume 3, Issue 1, 2024, Pages 117-132]
T
  • Tahvili, Arash Feasibility Study of Natural Ventilation Potential of Residential Buildings for Different Climates in Iran [Volume 3, Issue 1, 2024, Pages 185-206]
  • Talib, Sherin Performance Enhancement of Photovoltaic-Thermal Panel Using Hybrid Nanofluids [Volume 3, Issue 2, 2025, Pages 47-67]
  • Touiserkani, Mohammad Mahdi Numerical Simulation of the Effect of Conventional and Hybrid Nanofluids on the Cooling Performance of Automobile Radiator [Volume 3, Issue 2, 2025, Pages 137-151]
V
  • Vahidinia, Farhad A Review on the Various Solutions to Improve the Performance of the Solar Collector Absorber Tube by Using Turbulator and Hybrid Nanofluid [Volume 3, Issue 1, 2024, Pages 43-72]
Y
  • Younus, Ammar watheg Experimental Study on Bending Fatigue of 3D-Printed Specimens Fabricated via Fused Deposition Modeling [Volume 3, Issue 2, 2025, Pages 119-136]
Z
  • Zamani, Mahdi Design, Evaluation and Construction of a Test Rig For Predicting the Remaining Usefull Life of a Gearbox with a Spur Gear [Volume 3, Issue 2, 2025, Pages 33-46]
  • Zangooee Motlagh, Mohammad Reza Numerical Study of the Effect of Peak Cooler Structure on Airflow and Efficiency of Dry Cooling Tower [Volume 3, Issue 2, 2025, Pages 173-191]
  • Zolfaghari, Abbas Experimental Study on Bending Fatigue of 3D-Printed Specimens Fabricated via Fused Deposition Modeling [Volume 3, Issue 2, 2025, Pages 119-136]