Keyword Index
A
  • Absorption Numerical and Experimental Investigations of the Response of Foam-Filled Aluminum Square Profile Under Lateral and Axial Impact [Volume 3, Issue 1, 2024, Pages 23-42]
  • ABS Polymer Fabrication and Investigation of Mechanical Properties of Copper Alloy Matrix Composite Reinforced with Micron Diamond Particles [Volume 3, Issue 1, 2024, Pages 117-132]
  • ABS Polymer Preparation of Al-B4C Composite by Mechanical Alloying Method and Investigation of Its Thermomechanical Properties [Volume 3, Issue 1, 2024, Pages 163-183]
  • Acoustics Numerical Analysis of the Effect of Rake Angle on Hydrodynamic and Hydroacoustic Performance of DTMB Marine Propeller [Volume 3, Issue 2, 2024, Pages 81-98]
  • Airflow Numerical Study of the Effect of Peak Cooler Structure on Airflow and Efficiency of Dry Cooling Tower [Volume 3, Issue 2, 2024, Pages 173-191]
  • Atomic finite element model Determination of Orthotropic Elastic Properties and Study of Size Effect of Single-Layer and Double-Layer Graphene Nanoplates Using Atomic Finite Element Method [Volume 3, Issue 2, 2024, Pages 99-117]
B
  • Bulk thermal conductivity Performance Enhancement of Photovoltaic-Thermal Panel Using Hybrid Nanofluids [Volume 3, Issue 2, 2024, Pages 47-67]
  • Buoyancy Numerical Study of the Effect of Peak Cooler Structure on Airflow and Efficiency of Dry Cooling Tower [Volume 3, Issue 2, 2024, Pages 173-191]
C
  • Circular cylinders Effect of Elliptical Cylinder Arrangement on Turbulent Flow and Heat Transfer in Horizontal Channels [Volume 3, Issue 1, 2024, Pages 73-92]
  • Climate Consultant software Feasibility Study of Natural Ventilation Potential of Residential Buildings for Different Climates in Iran [Volume 3, Issue 1, 2024, Pages 185-206]
  • Coconut oil The Effect of Aluminum Porous Network Characteristics on the Complete Melting Time of Coconut Oil and the Temperature Uniformity of the Wall [Volume 3, Issue 2, 2024, Pages 153-172]
  • Complete melting time The Effect of Aluminum Porous Network Characteristics on the Complete Melting Time of Coconut Oil and the Temperature Uniformity of the Wall [Volume 3, Issue 2, 2024, Pages 153-172]
  • Compressed air storage Thermodynamic and Economic Analysis of a New Multiple Generation System Combined with Compressed Air Energy Storage and Sulfur Dioxide-Based Ejector Cooling System. [Volume 3, Issue 1, 2024, Pages 7-21]
  • Control Testbed Design and Construction of a Two-Axis Angle Control Testbed with a Hardware-in-the-Loop Approach [Volume 3, Issue 1, 2024, Pages 147-161]
  • Cooling tower Numerical Study of the Effect of Peak Cooler Structure on Airflow and Efficiency of Dry Cooling Tower [Volume 3, Issue 2, 2024, Pages 173-191]
D
  • Design Design, Evaluation and Construction of a Test Rig For Predicting the Remaining Usefull Life of a Gearbox with a Spur Gear [Volume 3, Issue 2, 2024, Pages 33-46]
  • DNA origami Design and Simulation of Polycationic Nano-Linkers for Connecting Polyanions Together [Volume 3, Issue 2, 2024, Pages 193-211]
  • DTMB propeller Numerical Analysis of the Effect of Rake Angle on Hydrodynamic and Hydroacoustic Performance of DTMB Marine Propeller [Volume 3, Issue 2, 2024, Pages 81-98]
  • Dynamic analysis Analytical Evaluation of 2-stage Pusher Centrifuge Dynamic Performance [Volume 3, Issue 1, 2024, Pages 93-115]
  • Dynamic analysis Investigating the effect of environmental conditions and fuel type on the energy and exergy parameters of a steam power plant [Volume 3, Issue 2, 2024, Pages 19-32]
  • Dynamic analysis Design, Evaluation and Construction of a Test Rig For Predicting the Remaining Usefull Life of a Gearbox with a Spur Gear [Volume 3, Issue 2, 2024, Pages 33-46]
E
  • Economic Analysis Thermodynamic and Economic Analysis of a New Multiple Generation System Combined with Compressed Air Energy Storage and Sulfur Dioxide-Based Ejector Cooling System. [Volume 3, Issue 1, 2024, Pages 7-21]
  • EES Investigating the effect of environmental conditions and fuel type on the energy and exergy parameters of a steam power plant [Volume 3, Issue 2, 2024, Pages 19-32]
  • Ejector refrigeration Thermodynamic and Economic Analysis of a New Multiple Generation System Combined with Compressed Air Energy Storage and Sulfur Dioxide-Based Ejector Cooling System. [Volume 3, Issue 1, 2024, Pages 7-21]
  • Elastic properties Determination of Orthotropic Elastic Properties and Study of Size Effect of Single-Layer and Double-Layer Graphene Nanoplates Using Atomic Finite Element Method [Volume 3, Issue 2, 2024, Pages 99-117]
  • Energy absorption Fabrication and Investigation of Mechanical Properties of Copper Alloy Matrix Composite Reinforced with Micron Diamond Particles [Volume 3, Issue 1, 2024, Pages 117-132]
  • Energy absorption Preparation of Al-B4C Composite by Mechanical Alloying Method and Investigation of Its Thermomechanical Properties [Volume 3, Issue 1, 2024, Pages 163-183]
  • Energy and Exergy Analysis Investigating the effect of environmental conditions and fuel type on the energy and exergy parameters of a steam power plant [Volume 3, Issue 2, 2024, Pages 19-32]
  • Energy optimization A Review on the Various Solutions to Improve the Performance of the Solar Collector Absorber Tube by Using Turbulator and Hybrid Nanofluid [Volume 3, Issue 1, 2024, Pages 43-72]
  • Engine Investigating the effect of spark plug and wire health on gasoline engine exhaust emissions [Volume 3, Issue 2, 2024, Pages 7-18]
  • Environment Investigating the effect of spark plug and wire health on gasoline engine exhaust emissions [Volume 3, Issue 2, 2024, Pages 7-18]
  • Evaporative Cooling Feasibility Study of Natural Ventilation Potential of Residential Buildings for Different Climates in Iran [Volume 3, Issue 1, 2024, Pages 185-206]
  • Exergy Thermodynamic and Economic Analysis of a New Multiple Generation System Combined with Compressed Air Energy Storage and Sulfur Dioxide-Based Ejector Cooling System. [Volume 3, Issue 1, 2024, Pages 7-21]
  • Exergy destruction rate Investigating the effect of environmental conditions and fuel type on the energy and exergy parameters of a steam power plant [Volume 3, Issue 2, 2024, Pages 19-32]
  • Experimental analysis Experimental Analysis of the Impact of Fuel Pressure and Filter Clogging on the Spray Rate of Automotive Fuel Injectors [Volume 3, Issue 2, 2024, Pages 69-79]
F
  • Fatigue life estimation Experimental Study on Bending Fatigue of 3D-Printed Specimens Fabricated via Fused Deposition Modeling [Volume 3, Issue 2, 2024, Pages 119-136]
  • Filter blockage Experimental Analysis of the Impact of Fuel Pressure and Filter Clogging on the Spray Rate of Automotive Fuel Injectors [Volume 3, Issue 2, 2024, Pages 69-79]
  • Fuel consumption Experimental Analysis of the Impact of Fuel Pressure and Filter Clogging on the Spray Rate of Automotive Fuel Injectors [Volume 3, Issue 2, 2024, Pages 69-79]
G
  • Gearbox Investigating the effect of environmental conditions and fuel type on the energy and exergy parameters of a steam power plant [Volume 3, Issue 2, 2024, Pages 19-32]
  • Gearbox Design, Evaluation and Construction of a Test Rig For Predicting the Remaining Usefull Life of a Gearbox with a Spur Gear [Volume 3, Issue 2, 2024, Pages 33-46]
  • Geothermal Energy Thermodynamic, Economic and Optimization Analysis of a New Geothermal Energy-Based Multiple Generation System for Hot Water, Cooling, Power and Liquid Hydrogen Production [Volume 3, Issue 1, 2024, Pages 207-225]
  • Ggraphene nanoplate Determination of Orthotropic Elastic Properties and Study of Size Effect of Single-Layer and Double-Layer Graphene Nanoplates Using Atomic Finite Element Method [Volume 3, Issue 2, 2024, Pages 99-117]
H
  • Hardware in the loop Design and Construction of a Two-Axis Angle Control Testbed with a Hardware-in-the-Loop Approach [Volume 3, Issue 1, 2024, Pages 147-161]
  • Heat transfer enhancement Numerical Simulation of the Effect of Conventional and Hybrid Nanofluids on the Cooling Performance of Automobile Radiator [Volume 3, Issue 2, 2024, Pages 137-151]
  • Heparin Design and Simulation of Polycationic Nano-Linkers for Connecting Polyanions Together [Volume 3, Issue 2, 2024, Pages 193-211]
  • Hierarchical Thin-Walled Structures Fabrication and Investigation of Mechanical Properties of Copper Alloy Matrix Composite Reinforced with Micron Diamond Particles [Volume 3, Issue 1, 2024, Pages 117-132]
  • Hierarchical Thin-Walled Structures Preparation of Al-B4C Composite by Mechanical Alloying Method and Investigation of Its Thermomechanical Properties [Volume 3, Issue 1, 2024, Pages 163-183]
  • Hybrid Numerical Simulation of the Effect of Conventional and Hybrid Nanofluids on the Cooling Performance of Automobile Radiator [Volume 3, Issue 2, 2024, Pages 137-151]
I
  • Ignition system Investigating the effect of spark plug and wire health on gasoline engine exhaust emissions [Volume 3, Issue 2, 2024, Pages 7-18]
  • Internal combustion engine Experimental Investigation of the Effect of Fuel Injection Timing on the Combustion Regime of the Direct-Injection Internal Combustion Engine – Transition from Conventional Compression Ignition Combustion to Low Temperature Combustion [Volume 3, Issue 1, 2024, Pages 133-146]
  • Iran's Climate Conditions Feasibility Study of Natural Ventilation Potential of Residential Buildings for Different Climates in Iran [Volume 3, Issue 1, 2024, Pages 185-206]
K
  • Köppen-Geiger Climatology Feasibility Study of Natural Ventilation Potential of Residential Buildings for Different Climates in Iran [Volume 3, Issue 1, 2024, Pages 185-206]
L
  • Layers Determination of Orthotropic Elastic Properties and Study of Size Effect of Single-Layer and Double-Layer Graphene Nanoplates Using Atomic Finite Element Method [Volume 3, Issue 2, 2024, Pages 99-117]
  • Linear and non-linear regressions Experimental Study on Bending Fatigue of 3D-Printed Specimens Fabricated via Fused Deposition Modeling [Volume 3, Issue 2, 2024, Pages 119-136]
  • Low Temperature Combustion Experimental Investigation of the Effect of Fuel Injection Timing on the Combustion Regime of the Direct-Injection Internal Combustion Engine – Transition from Conventional Compression Ignition Combustion to Low Temperature Combustion [Volume 3, Issue 1, 2024, Pages 133-146]
M
  • Marine propellers Numerical Analysis of the Effect of Rake Angle on Hydrodynamic and Hydroacoustic Performance of DTMB Marine Propeller [Volume 3, Issue 2, 2024, Pages 81-98]
  • Modal Analysis Analytical Evaluation of 2-stage Pusher Centrifuge Dynamic Performance [Volume 3, Issue 1, 2024, Pages 93-115]
  • Molecular Dynamics Simulation Design and Simulation of Polycationic Nano-Linkers for Connecting Polyanions Together [Volume 3, Issue 2, 2024, Pages 193-211]
N
  • Nanofluids Numerical Simulation of the Effect of Conventional and Hybrid Nanofluids on the Cooling Performance of Automobile Radiator [Volume 3, Issue 2, 2024, Pages 137-151]
  • Natural gas Investigating the effect of environmental conditions and fuel type on the energy and exergy parameters of a steam power plant [Volume 3, Issue 2, 2024, Pages 19-32]
  • Navigation Systems Finding the Optimal Position of the Distance Measuring Device with the Aim of Reducing Risk and Uncertainty in the Aircraft Landing Phase [Volume 3, Issue 1, 2024, Pages 227-238]
  • Noise Numerical Analysis of the Effect of Rake Angle on Hydrodynamic and Hydroacoustic Performance of DTMB Marine Propeller [Volume 3, Issue 2, 2024, Pages 81-98]
O
  • Optimum landing Finding the Optimal Position of the Distance Measuring Device with the Aim of Reducing Risk and Uncertainty in the Aircraft Landing Phase [Volume 3, Issue 1, 2024, Pages 227-238]
P
  • Peak Cooler Numerical Study of the Effect of Peak Cooler Structure on Airflow and Efficiency of Dry Cooling Tower [Volume 3, Issue 2, 2024, Pages 173-191]
  • PID Controller Design and Construction of a Two-Axis Angle Control Testbed with a Hardware-in-the-Loop Approach [Volume 3, Issue 1, 2024, Pages 147-161]
  • PLA polymer Experimental Study on Bending Fatigue of 3D-Printed Specimens Fabricated via Fused Deposition Modeling [Volume 3, Issue 2, 2024, Pages 119-136]
  • Pollutant Investigating the effect of spark plug and wire health on gasoline engine exhaust emissions [Volume 3, Issue 2, 2024, Pages 7-18]
  • Polycationic nano-linker Design and Simulation of Polycationic Nano-Linkers for Connecting Polyanions Together [Volume 3, Issue 2, 2024, Pages 193-211]
  • Position control Design and Construction of a Two-Axis Angle Control Testbed with a Hardware-in-the-Loop Approach [Volume 3, Issue 1, 2024, Pages 147-161]
  • Pusher centrifuge Analytical Evaluation of 2-stage Pusher Centrifuge Dynamic Performance [Volume 3, Issue 1, 2024, Pages 93-115]
R
  • Remaining useful life Design, Evaluation and Construction of a Test Rig For Predicting the Remaining Usefull Life of a Gearbox with a Spur Gear [Volume 3, Issue 2, 2024, Pages 33-46]
  • Remaining Useful Life Vibration Analysis Investigating the effect of environmental conditions and fuel type on the energy and exergy parameters of a steam power plant [Volume 3, Issue 2, 2024, Pages 19-32]
  • Rotating fatigue test Experimental Study on Bending Fatigue of 3D-Printed Specimens Fabricated via Fused Deposition Modeling [Volume 3, Issue 2, 2024, Pages 119-136]
S
  • Semi-porous aluminum cavity The Effect of Aluminum Porous Network Characteristics on the Complete Melting Time of Coconut Oil and the Temperature Uniformity of the Wall [Volume 3, Issue 2, 2024, Pages 153-172]
  • Simulation Performance Enhancement of Photovoltaic-Thermal Panel Using Hybrid Nanofluids [Volume 3, Issue 2, 2024, Pages 47-67]
  • Simulation Numerical Study of the Effect of Peak Cooler Structure on Airflow and Efficiency of Dry Cooling Tower [Volume 3, Issue 2, 2024, Pages 173-191]
  • Solar energy Performance Enhancement of Photovoltaic-Thermal Panel Using Hybrid Nanofluids [Volume 3, Issue 2, 2024, Pages 47-67]
  • Spark plug Investigating the effect of spark plug and wire health on gasoline engine exhaust emissions [Volume 3, Issue 2, 2024, Pages 7-18]
  • Spermidine Design and Simulation of Polycationic Nano-Linkers for Connecting Polyanions Together [Volume 3, Issue 2, 2024, Pages 193-211]
  • Steady and transient flow Effect of Elliptical Cylinder Arrangement on Turbulent Flow and Heat Transfer in Horizontal Channels [Volume 3, Issue 1, 2024, Pages 73-92]
  • Steam Power Plant Investigating the effect of environmental conditions and fuel type on the energy and exergy parameters of a steam power plant [Volume 3, Issue 2, 2024, Pages 19-32]
  • Sulfur Dioxide Thermodynamic and Economic Analysis of a New Multiple Generation System Combined with Compressed Air Energy Storage and Sulfur Dioxide-Based Ejector Cooling System. [Volume 3, Issue 1, 2024, Pages 7-21]
T
  • Taguchi The Effect of Aluminum Porous Network Characteristics on the Complete Melting Time of Coconut Oil and the Temperature Uniformity of the Wall [Volume 3, Issue 2, 2024, Pages 153-172]
  • Temperature uniformity index The Effect of Aluminum Porous Network Characteristics on the Complete Melting Time of Coconut Oil and the Temperature Uniformity of the Wall [Volume 3, Issue 2, 2024, Pages 153-172]
  • TPE Numerical Simulation of the Effect of Conventional and Hybrid Nanofluids on the Cooling Performance of Automobile Radiator [Volume 3, Issue 2, 2024, Pages 137-151]
  • Turbulence Reduce Finding the Optimal Position of the Distance Measuring Device with the Aim of Reducing Risk and Uncertainty in the Aircraft Landing Phase [Volume 3, Issue 1, 2024, Pages 227-238]
  • Two-axis Mechanism Design and Construction of a Two-Axis Angle Control Testbed with a Hardware-in-the-Loop Approach [Volume 3, Issue 1, 2024, Pages 147-161]
V
  • Vibration Analysis Design, Evaluation and Construction of a Test Rig For Predicting the Remaining Usefull Life of a Gearbox with a Spur Gear [Volume 3, Issue 2, 2024, Pages 33-46]
  • Vortex Effect of Elliptical Cylinder Arrangement on Turbulent Flow and Heat Transfer in Horizontal Channels [Volume 3, Issue 1, 2024, Pages 73-92]