[1] Yadegari, M. An optimal design for S-shaped air intake diffusers using simultaneous entropy generation analysis and multi-objective genetic algorithm, The European Physical Journal Plus, (2021), Vol. 136, No. 10, pp. 10-19,
[2] Yadegari, M. and A. Bak Khoshnevis. A numerical study over the effect of curvature and adverse pressure gradient on development of flow inside gas transmission pipelines, Journal of the Brazilian Society of Mechanical Sciences and Engineering, (2020),
[3] Haghighatjoo, H. M. Yadegari, and A. Bak Khoshnevis. Optimization of single-obstacle location and distance between square obstacles in a curved channel, The European Physical Journal Plus, (2022), Vol. 137, No. 9, pp. 1042,
[4] Yadegari, M. and A. Bak Khoshnevis. Investigation of entropy generation, efficiency, static and ideal pressure recovery coefficient in curved annular diffusers, The European Physical Journal Plus, (2021), Vol. 136, pp. 1-19,
[5] Yadegari, M. and A.B. Khoshnevis. Numerical study of the effects of adverse pressure gradient parameter, turning angle and curvature ratio on turbulent flow in 3D turning curved rectangular diffusers using entropy generation analysis, The European Physical Journal Plus, (2020), Vol. 135, No.7, pp. 548,
[6] Yadegari, M. and A.B. Khoshnevis. Entropy generation analysis of turbulent boundary layer flow in different curved diffusers in air-conditioning systems, The European Physical Journal Plus, (2020), Vol. 135, No. 6, pp. 534,
[7] Yadegari, M. and M. Ghassemi, Investigation of the Effects of Temperature, Mass Flow Rate of the Injected Fuel, Pore Diameter, Porosity and Ambient Pressure on the Amount of Pollutants in the Combustion Chamber. Iranian Journal of Mechanical Engineering Transactions of the ISME, 2022. 23(1): p. 122-146.
[8] Minaei, A. and Moallemi Khiavi, N, Thermal Comfort Evaluation for Naturally Ventilated Building Applying an Adaptive Model in Different Cities of Iran. Amirkabir Journal of Mechanical Engineering, (2023). 54(11), 2663-2680. (in Persian)
[9] Sadeghi, N. Gorji Mahlabani, Y. & Nazif, H. R, Numerical investigation on thermal performance of a wind catcher for natural ventilation in hot and dry climate. Journal of Renewable and New Energy,. (2021). 8(1), 33-40. (in Persian)
[10] Neshat Safavi, S. H. & Eghbali, S. R, Investigation of Phase Change Materials Selection in Passive Cooling to Improve Natural Ventilation and Thermal Comfort. Journal of Renewable and New Energy, (2021). 8(2), 1-10. (in Persian)
[11] Amaripadath, D. Rahif, R. Zuo, W. Velickovic, M. Voglaire, C. & Attia, S. Climate change sensitive sizing and design for nearly zero-energy office building systems in Brussels. Energy and Buildings, (2023). 286, 112971.
[12] Wilberforce, T. Olabi, A. G. Sayed, E. T. Elsaid, K. Maghrabie, H. M. & Abdelkareem, M. A. A review on zero energy buildings–Pros and cons. Energy and Built Environment, (2023). 4(1), 25-38.
[13] Taherahmadi, J. Noorollahi, Y. & Panahi, M. Toward comprehensive zero energy building definitions: a literature review and recommendations. International Journal of Sustainable Energy, (2021). 40(2), 120-148.
[14] Sarir, P. & Sharifzadeh, M. Application of passive and active scenarios to a residential building in a dry and hot climate to achieve a positive energy building (PEB). Heliyon, (2024). 10(10).
[15] Mirlohi, S. M. Sadeghzadeh, M. Kumar, R. & Ghassemieh, M. Implementation of a zero-energy building scheme for a hot and dry climate region in Iran (a Case Study, Yazd). Renewable energy research and applications, (2020). 1(1), 65-74.
[16] Varmaghani, H. & Kasmaei, A. Factors Affecting Energy Conservation in High-rise Buildings Case of 22th District of Tehran. Iranian Journal of Energy, (2021). 24(1), 67-100. (in Persian)
[17] Entezari , A, mayvaneh , F. khazaeenejad , F. (2020). Sun, Wind and Light (Design Strategies in Consistent Architecture with Climate) Case Study: Yazd City. jgs , 20(56), 223-240. (in Persian)
[18] Schiavon, S; H. Tyler; Piccioli, Alberto. Web application for thermal comfort visualization and calculation according to ASHRAE Standard 55. In: Building Simulation. Tsinghua University Press, 2014. p. 321-334.
[19] ZHANG, Yufeng, et al. Thermal comfort in naturally ventilated buildings in hot-humid area of China. Building and Environment, 2010, 45.11: 2562-2570.
[20] Raziei, T. Köppen-Geiger climate classification of Iran and investigation of its changes during 20th century. Journal of the Earth and Space Physics
(2017)., 43(2), 419-439.
[21] Ghiai, M. M. Arjmand, J. T. Mohammadi, O. Ahmadi, M. H. & Assad, M. E. H. Investigation and modeling of energy consumption of tall office buildings in Iran'shot-arid'andcold'climate conditions. International Journal of Low-Carbon Technologies, (2021). 16(1), 21-34.
[22] Aram, K. Taherkhani, R. & Šimelytė, A. Multistage optimization toward a nearly net zero energy building due to climate change. Energies, (2022). 15(3), 983.
[23] Haghgoo Fakhr, M. Rahimi Ariaei, A. & Jahangiri, M. Techno‐Econo‐Enviro Assessment of Photovoltaic‐Thermal (PV‐T) System for Residential Use in Iran Based on Köppen Climate Classification. International Journal of Energy Research, (2023). (1), 6657485.
[24] Chang, H. Hou, Y. Lee, I. Liu, T. & Acharya, T. D, Feasibility study and passive design of nearly zero energy building on rural houses in Xi’an, China. Buildings, . (2022). 12(3), 341.
[25] Arif, S. Taweekun, J. Ali, H. M. Yanjun, D. A. I. & Ahmed, A. Feasibility study and economic analysis of grid connected solar powered net zero energy building (NZEB) of shopping mall for two different climates of Pakistan and Thailand. Case Studies in Thermal Engineering, (2021). 26, 101049.
[26] Climate Date for Cities Worldwide. https://en.climate-data.org
[27] Khalili, M. Climatic Design of a Residential Villa and Finding Suitable Solar
Heating Technology to Meet Thermal Needs in the Cold Climate of Iran. Journal of
Solar Energy Research, (2021). vol. 6(4),pp 865-882.
[28] Vahidifar, S. Nabavi, S. H. Zakeri, M. Naserian, M. M. & Heydarian, A. Numerical and Experimental study of a new building cooling system based on compression refrigeration cycle. Science and Technology in Mechanical Engineering, (2023). 1(1), 126-137. (in Persian)
[29] Akbari, S. A. H. & Javanshir, Y. Energy and exergy analysis of the organic Rankine cycle used for recovering waste heat from the cement industry... Science and Technology in Mechanical Engineering, (2023). 2(1), 7-25
علم و فناوری در مهندسی مکانیک