علم و فناوری در مهندسی مکانیک

علم و فناوری در مهندسی مکانیک

تحلیل اجزای محدود ایمپلنت‌های شبکه‌ای متخلخل بر پایه‌ی هندسه‌ی ژیرویید برای کاربرد در قفس‌های بین مهره‌ای

نوع مقاله : مقاله علمی

نویسندگان
مکانیک جامدات، دانشکده مهندسی مکانیک، دانشگاه شیراز، شیراز، ایران
10.22034/stme.2026.598788.1244
چکیده
ستون فقرات از حیاتی‌ترین اجزای بدن است و نقشی اساسی در حفظ پایداری بدن و محافظت از اعصاب کانال نخاعی دارد. درعین‌حال به علت آسیب‌های وارده بر دیسک‌های بین‌مهره‌ای و تحت فشار قرارگرفتن عصب‌های موجود در این ناحیه این عضو یکی از منابع دردهای شدید ناحیه‌ی پایین کمر و همین‌طور پاها می‌باشد. یکی از روش‌های درمان، استفاده از قفس‌های جوش بین‌مهره‌ای است. در این روش تمام یا بخشی از دیسک بین‌مهره‌ای آسیب‌دیده خارج می‌شود و ایمپلنت مناسب بین دو مهره‌ی هدف جای‌گذاری می‌شود. در صورت استفاده از ایمپلنت با سفتی بسیار بالاتر از استخوان به دلیل کرنش بسیار کمتر و در نتیجه تحمل بار بسیار بیشتر توسط ایمپلنت، سهم بسیار کمی از تنش به استخوان خواهد رسید که به آن پدیده‌ی‌ سپر تنش می‌گویند. سپر تنش باعث تحلیل رفتن استخوان می‌شود؛ بنابراین طرح راهکاری برای جلوگیری از این پدیده بسیار حیاتی است. یکی از این راهکارها استفاده از ساختارهای شبکه‌ای و متخلخل در طراحی ایمپلنت‌ها می‌باشد که در عین کاهش سفتی و توزیع بهتر تنش بین ایمپلنت و استخوان، بستر مناسبی برای تحریک رشد استخوان فراهم می‌کند به‌علاوه می‌توان میزان سفتی را توسط تنظیم چگالی نسبی ساختار کنترل کرد. یکی از بهترین ساختارهای شبکه‌ای به علت عدم وجود زوایای تند ساختار TPMS می‌باشد. در این پژوهش با استفاده از این ساختارها و طراحی قفس کاملاً مطابق با خواص مکانیکی مهره‌های مجاور اثرات سپر تنش تا 5/24 درصد کاهش داده می‌شود که باعث افزایش موفقیت جراحی و بهبود کیفیت زندگی بیمار می‌شود.
کلیدواژه‌ها
موضوعات

عنوان مقاله English

Finite Element Analysis of Gyroid-Based Porous Lattice Implants for Intervertebral Cage Applications

نویسندگان English

Erfan Ebrahimi
Amin Kazemi
Solid Mechanics, School of Mechanical Engineering, Shiraz University, Shiraz, Iran
چکیده English

The spine is one of the body’s most vital components, playing an essential role in maintaining structural stability and protecting the nerves within the spinal canal. However, due to intervertebral disc damage and subsequent nerve compression, it is also a major source of severe lower back and leg pain. A common treatment method is the use of intervertebral fusion cages. In this procedure, all or part of the damaged intervertebral disc is removed, and a suitable implant is inserted between the target vertebrae.

If an implant with significantly higher stiffness than the bone is used, it undergoes much less strain and bears the majority of the load. Consequently, a disproportionately small share of stress is transferred to the bone—a phenomenon known as stress shielding. Stress shielding leads to bone resorption; therefore, developing strategies to mitigate it is highly critical.

One effective strategy is incorporating porous lattice structures into the implant design. These structures reduce stiffness and improve stress distribution between the implant and bone, while also providing an optimal scaffold to stimulate bone ingrowth. Additionally, their stiffness can be controlled by adjusting the relative density. Due to the absence of sharp corners, Triply Periodic Minimal Surface (TPMS) architectures are considered among the best lattice structures. In this research, by utilizing these structures to design a cage perfectly matched to the mechanical properties of adjacent vertebrae, stress shielding effects are reduced by up to 24.5%, ultimately increasing surgical success and improving the patient’s quality of life.

کلیدواژه‌ها English

Finite Element Analysis (FEA)
Intervertebral cage
Lattice structures
Spine

مقالات آماده انتشار، پذیرفته شده
انتشار آنلاین از 30 آبان 1405

  • تاریخ دریافت 01 شهریور 1405
  • تاریخ بازنگری 07 آبان 1405
  • تاریخ پذیرش 30 آبان 1405
  • تاریخ اولین انتشار 30 آبان 1405
  • تاریخ انتشار 30 آبان 1405