Keyword Index
A
  • AA6063 Alloy Step Tube Investigating the effect of process parameters on gas forming of AA6063 aluminum tube at hot temperature using response surface method [Volume 1, Issue 1, 2023, Pages 83-99]
  • Absorption Numerical and Experimental Investigations of the Response of Foam-Filled Aluminum Square Profile Under Lateral and Axial Impact [Volume 3, Issue 1, 2024, Pages 23-42]
  • ABS Polymer Fabrication and Investigation of Mechanical Properties of Copper Alloy Matrix Composite Reinforced with Micron Diamond Particles [Volume 3, Issue 1, 2024, Pages 117-132]
  • ABS Polymer Preparation of Al-B4C Composite by Mechanical Alloying Method and Investigation of Its Thermomechanical Properties [Volume 3, Issue 1, 2024, Pages 163-183]
  • Acoustics Numerical Analysis of the Effect of Rake Angle on Hydrodynamic and Hydroacoustic Performance of DTMB Marine Propeller [Volume 3, Issue 2, 2024, Pages 81-98]
  • Additive Manufacturing Residual stress distribution in Inconel 625 superalloy samples obtained from the selective laser melting (SLM) process using the finite element method [Volume 2, Issue 1, 2023, Pages 87-99]
  • Aerial Robot Routing for unmanned flying robots in expedited order delivery within distribution networks and online customer service platforms [Volume 2, Issue 2, 2023, Pages 111-125]
  • Aerodynamic Interference Numerical Analysis of Unsteady Aerodynamic Interference between Two Adjacent Moving objects [Volume 4, Issue 1, 2025, Pages 7-19]
  • Aerodynamic of building Numerical and Analytical Study of the Effect of Different Architectural Geometries on the Stack Effect and Energy Consumption in Tall Buildings [Volume 2, Issue 1, 2023, Pages 183-198]
  • Airflow Numerical Study of the Effect of Peak Cooler Structure on Airflow and Efficiency of Dry Cooling Tower [Volume 3, Issue 2, 2024, Pages 173-191]
  • Air velocity Development and experimental assessment of an Evaporative cooling system with Wetting surfaces [(Articles in Press)]
  • AISI 304 Stainless Steel Experimental investigation of forming AISI 304 stainless steel sheets using high water pressure [(Articles in Press)]
  • Aluminum 7075 Experimental investigation of workability of age-hardened Aluminum 7075 in ECAP process [(Articles in Press)]
  • Aluminum Beam Modeling and Estimation of Spectral Stretching in Aluminum Beam Frequency Response Function Signals Using Experimental Modal Analysis and Adaptive Signal Processing [Volume 4, Issue 2, 2025, Pages 219-240]
  • Anomaly Detection Data-driven and unsupervised damage detection in frame structures using deep neural networks [Volume 4, Issue 2, 2025, Pages 65-81]
  • Ansys Numerical Analysis of Blood Interaction in a Vessel with a Flexible Wall [Volume 1, Issue 1, 2023, Pages 20-38]
  • ANSYS APDL Creep analysis of visco-hyperelastic non-uniform rotating disks [Volume 2, Issue 1, 2023, Pages 115-132]
  • Ansys Fluent Numerical Analysis of the Impact of Vortex Finder Diameter Ratio on Cyclone Performance [(Articles in Press)]
  • Artificial intelligence Investigating matrix cracking and fiber failure in composites using artificial intelligence and multiscale models [Volume 4, Issue 1, 2025, Pages 165-181]
  • Atomic finite element model Determination of Orthotropic Elastic Properties and Study of Size Effect of Single-Layer and Double-Layer Graphene Nanoplates Using Atomic Finite Element Method [Volume 3, Issue 2, 2024, Pages 99-117]
  • Automatic calibration Presenting an Innovative Model Based on Physical Criteria for Accurate Prediction of Flame Flashback Phenomenon in Methane-Air Premixed Burners Using Automatic Calibration and Experimental Validation [(Articles in Press)]
  • Automotive engineering Failure analysis of six-cylinder passenger car engine camshaft [Volume 1, Issue 1, 2023, Pages 70-82]
  • AVL BOOST Numerical simulation of EF7 engine in different operating conditions [Volume 2, Issue 2, 2023, Pages 101-109]
B
  • Back pressure Evaluation of mechanical properties of ultrafine-grained pure titanium produced via warm ECAP process by concurrently utilizing casing and back pressure [Volume 4, Issue 2, 2025, Pages 47-63]
  • Back pressure Experimental investigation of workability of age-hardened Aluminum 7075 in ECAP process [(Articles in Press)]
  • Balance Experimental Analysis of an Orthosis Effect on Human Balance during standing and walking [Volume 1, Issue 1, 2023, Pages 138-144]
  • Baseball pitching؛ shoulder and elbow angles؛ shoulder and elbow joint torques Design of an optimal sliding mode controller for modeling and dynamic analysis of hand motion in baseball throwing [Volume 4, Issue 2, 2025, Pages 191-204]
  • Bentonite Studying effects of pelletizing process parameters on the main properties of iron ore green pellets-laboratory approach [Volume 2, Issue 2, 2023, Pages 7-19]
  • Blade Angle Numerical investigation of the blade angle in the middle and final stages of a five-stage turbomolecular pump by considering the effect of returning molecules from other stages using the TPMC method [Volume 2, Issue 1, 2023, Pages 51-65]
  • Blanket Numerical study of the effect of magnetic field on velocity and pressure drop of magneto hydrodynamic fluid in blanket [Volume 1, Issue 1, 2023, Pages 113-125]
  • Blood Numerical Analysis of Blood Interaction in a Vessel with a Flexible Wall [Volume 1, Issue 1, 2023, Pages 20-38]
  • Boron carbide Investigation of the corrosion resistance and hardness of 316L steel with reduced graphene oxide/boron carbide/titanium carbide coating deposited by laser method [(Articles in Press)]
  • Brackish Water Mathematical modeling of a thermally driven multistage desalination system (MED) for industrial applications [Volume 4, Issue 2, 2025, Pages 83-97]
  • Brayton Cycle Advanced Thermodynamic Analysis and Performance Enhancement of Gas Turbine Cycles with Intercooler and Recuperator [(Articles in Press)]
  • Bronze Investigation of the Effect of Diamond Additive Percentage on the Mechanical and Wear Properties of Bronze-Diamond Composite for Use in Industries [Volume 4, Issue 2, 2025, Pages 7-25]
  • Brushless DC Motor Thermal analysis and cooling system design for marine brushless DC motor [Volume 2, Issue 1, 2023, Pages 145-156]
  • Building cooling system Numerical and Experimental study of a new building cooling system based on compression refrigeration cycle [Volume 1, Issue 1, 2023, Pages 126-137]
  • Bulk materials A Review on Heat Transfer Coefficient Measuring Methods in Bulk and Film Specimens [Volume 2, Issue 2, 2023, Pages 57-77]
  • Bulk thermal conductivity Performance Enhancement of Photovoltaic-Thermal Panel Using Hybrid Nanofluids [Volume 3, Issue 2, 2024, Pages 47-67]
  • Buoyancy Numerical Study of the Effect of Peak Cooler Structure on Airflow and Efficiency of Dry Cooling Tower [Volume 3, Issue 2, 2024, Pages 173-191]
C
  • Camshaft fracture Failure analysis of six-cylinder passenger car engine camshaft [Volume 1, Issue 1, 2023, Pages 70-82]
  • Carbon Nanotube The effect of hot fluid and Nanotube-Water Flow Rate on the Efficiency of Nanofluid on Gasket-plate heat exchanger [Volume 1, Issue 1, 2023, Pages 100-112]
  • CAREUA Model Numerical Analysis of Blood Interaction in a Vessel with a Flexible Wall [Volume 1, Issue 1, 2023, Pages 20-38]
  • Casing Evaluation of mechanical properties of ultrafine-grained pure titanium produced via warm ECAP process by concurrently utilizing casing and back pressure [Volume 4, Issue 2, 2025, Pages 47-63]
  • Centerline Estimation Finding the optimal position of the DME with the aim of reducing probability airplane landing error in non-ideal conditions [Volume 2, Issue 2, 2023, Pages 127-136]
  • CFRP؛ Arcan Test؛ Bonded Joints؛ Adhesive؛ Surface Treatment؛ Mode I Experimental Investigation of Adhesively Bonded Composite–Composite Joints under Varied Loading Conditions Using U Shaped Arcan Specimens [Volume 4, Issue 2, 2025, Pages 139-151]
  • Circular cylinders Effect of Elliptical Cylinder Arrangement on Turbulent Flow and Heat Transfer in Horizontal Channels [Volume 3, Issue 1, 2024, Pages 73-92]
  • Climate Consultant software Feasibility Study of Natural Ventilation Potential of Residential Buildings for Different Climates in Iran [Volume 3, Issue 1, 2024, Pages 185-206]
  • Coconut oil The Effect of Aluminum Porous Network Characteristics on the Complete Melting Time of Coconut Oil and the Temperature Uniformity of the Wall [Volume 3, Issue 2, 2024, Pages 153-172]
  • Combined heat and power (CHP) production Thermoeconomics Analysis and Optimization of a Geothermal-Based Power and Heat Generation System Using Genetic Algorithm [Volume 4, Issue 1, 2025, Pages 183-201]
  • Complete melting time The Effect of Aluminum Porous Network Characteristics on the Complete Melting Time of Coconut Oil and the Temperature Uniformity of the Wall [Volume 3, Issue 2, 2024, Pages 153-172]
  • Composite Investigation of the Effect of Diamond Additive Percentage on the Mechanical and Wear Properties of Bronze-Diamond Composite for Use in Industries [Volume 4, Issue 2, 2025, Pages 7-25]
  • Composite additives Enhancement of Mechanical and Thermal Properties of Injection-Molded Polypropylene Parts Using Glass Fibers [(Articles in Press)]
  • Composite؛ Matrix Cracking؛ Fiber Failure؛ Quasi-simultaneous multiscale Investigating matrix cracking and fiber failure in composites using artificial intelligence and multiscale models [Volume 4, Issue 1, 2025, Pages 165-181]
  • Composite pipes Buckling and Post-Buckling Analysis of Composite Pipe Reinforced with Shape Memory Alloy under Internal Pressure [Volume 4, Issue 2, 2025, Pages 205-218]
  • Compressed air storage Thermodynamic and Economic Analysis of a New Multiple Generation System Combined with Compressed Air Energy Storage and Sulfur Dioxide-Based Ejector Cooling System. [Volume 3, Issue 1, 2024, Pages 7-21]
  • COMSOL Three-dimensional heat transfer simulation of a non-Newtonian droplet considering the effects of surface evaporation [Volume 2, Issue 1, 2023, Pages 41-49]
  • Contact fatigue Numerical study of subsurface crack growth in the spalling phenomenon of a spur gear tooth [Volume 4, Issue 2, 2025, Pages 257-269]
  • Control Testbed Design and Construction of a Two-Axis Angle Control Testbed with a Hardware-in-the-Loop Approach [Volume 3, Issue 1, 2024, Pages 147-161]
  • Convergence-Divergence Angle Explaining the mechanical design of the middle space in the Bazar Markazi of Mashhad in order to reduce energy consumption and increase the thermal comfort of the audience. [Volume 2, Issue 1, 2023, Pages 167-182]
  • Convergence-Divergence Angle Numerical Study of the Effect of Sprinkler Structure during Water Discharge in Dry Fire Fighting System [Volume 2, Issue 1, 2023, Pages 157-166]
  • Convergent-Divergent Nozzle Explaining the mechanical design of the middle space in the Bazar Markazi of Mashhad in order to reduce energy consumption and increase the thermal comfort of the audience. [Volume 2, Issue 1, 2023, Pages 167-182]
  • Convergent-Divergent Nozzle Numerical Study of the Effect of Sprinkler Structure during Water Discharge in Dry Fire Fighting System [Volume 2, Issue 1, 2023, Pages 157-166]
  • Conveyor design Study the influencing parameters on performance of screw conveyor in order to redesign it in ShahreBabak copper complex [Volume 2, Issue 2, 2023, Pages 49-56]
  • Cooling tower Numerical Study of the Effect of Peak Cooler Structure on Airflow and Efficiency of Dry Cooling Tower [Volume 3, Issue 2, 2024, Pages 173-191]
  • Cooling tower Investigation of the Effect of Packing Type on Thermal Performance of a Wet Cooling Tower Using Nanofluid Flow [Volume 4, Issue 1, 2025, Pages 203-216]
  • Copper oxide Experimental Study on Enhancement of Heat Transfer in Peugeot 206 Radiator Using Oxide Nanofluids [Volume 4, Issue 1, 2025, Pages 107-123]
  • Copper sheet Investigating the effect of friction coefficient on the forming force of copper sheet in the pressing process in bound groove molds [Volume 2, Issue 2, 2023, Pages 79-89]
  • Crack initiation and growth Numerical study of subsurface crack growth in the spalling phenomenon of a spur gear tooth [Volume 4, Issue 2, 2025, Pages 257-269]
  • Creep Creep analysis of visco-hyperelastic non-uniform rotating disks [Volume 2, Issue 1, 2023, Pages 115-132]
  • Cross section of building Numerical and Analytical Study of the Effect of Different Architectural Geometries on the Stack Effect and Energy Consumption in Tall Buildings [Volume 2, Issue 1, 2023, Pages 183-198]
  • Cyclone particle separation efficiency Numerical Analysis of the Impact of Vortex Finder Diameter Ratio on Cyclone Performance [(Articles in Press)]
D
  • Dang Van method Influence of cylindrical slotted holes on the fatigue performance of overhead crane wheels [(Articles in Press)]
  • Deep Learning Models Comparison and Review of the Application of Deep Learning Models in Forecasting Electrical Energy Generation of Photovoltaic Systems with a Focus on LSTM and Hybrid Models [(Articles in Press)]
  • Deep Neural Network Real-time fault-tolerant controller of induction motors using optimized CNN-LSTM deep neural network based on vibration-acoustic data and proposed control algorithm [Volume 4, Issue 2, 2025, Pages 113-138]
  • DEM Effects of vibrator characteristics on uncloging and outflow of silo containing granular material-DEM approach [Volume 1, Issue 1, 2023, Pages 39-57]
  • Design Design, Evaluation and Construction of a Test Rig For Predicting the Remaining Usefull Life of a Gearbox with a Spur Gear [Volume 3, Issue 2, 2024, Pages 33-46]
  • Design point Design Point and Off-Design Simulation of a Gas Turbine–Solar Power Plant [(Articles in Press)]
  • Diamond Investigation of the Effect of Diamond Additive Percentage on the Mechanical and Wear Properties of Bronze-Diamond Composite for Use in Industries [Volume 4, Issue 2, 2025, Pages 7-25]
  • Different Aspect Ratios Numerical Investigation of the Effect of Elliptical Deflectors with Different Aspect Ratios on the Aerodynamic Performance of a Savonius Wind Turbine [(Articles in Press)]
  • DNA origami Design and Simulation of Polycationic Nano-Linkers for Connecting Polyanions Together [Volume 3, Issue 2, 2024, Pages 193-211]
  • Double-Skin Facade Dynamic evaluation of the effect of cavity depth in a double-skin façade with hybrid panels on seasonal energy performance [(Articles in Press)]
  • Droplet diffusion Prediction and simulation of diffusion of a droplet in a porous media using two-phase control volume [Volume 2, Issue 1, 2023, Pages 27-40]
  • Droplet diffusivity Prediction and simulation of diffusion of a droplet in a porous media using two-phase control volume [Volume 2, Issue 1, 2023, Pages 27-40]
  • Droplet falling Three-dimensional heat transfer simulation of a non-Newtonian droplet considering the effects of surface evaporation [Volume 2, Issue 1, 2023, Pages 41-49]
  • Dry Pipe Sprinkler Explaining the mechanical design of the middle space in the Bazar Markazi of Mashhad in order to reduce energy consumption and increase the thermal comfort of the audience. [Volume 2, Issue 1, 2023, Pages 167-182]
  • Dry Pipe Sprinkler Numerical Study of the Effect of Sprinkler Structure during Water Discharge in Dry Fire Fighting System [Volume 2, Issue 1, 2023, Pages 157-166]
  • DTMB propeller Numerical Analysis of the Effect of Rake Angle on Hydrodynamic and Hydroacoustic Performance of DTMB Marine Propeller [Volume 3, Issue 2, 2024, Pages 81-98]
  • Dynamic analysis Analytical Evaluation of 2-stage Pusher Centrifuge Dynamic Performance [Volume 3, Issue 1, 2024, Pages 93-115]
  • Dynamic analysis Investigating the effect of environmental conditions and fuel type on the energy and exergy parameters of a steam power plant [Volume 3, Issue 2, 2024, Pages 19-32]
  • Dynamic analysis Design, Evaluation and Construction of a Test Rig For Predicting the Remaining Usefull Life of a Gearbox with a Spur Gear [Volume 3, Issue 2, 2024, Pages 33-46]
  • Dynamic analysis Star structure layout of recreational airplane to reduce stress in unsymmetric flight [(Articles in Press)]
  • Dynamic Relaxation Analysis of Mindlin Plates by Dynamic Relaxation Method [Volume 4, Issue 2, 2025, Pages 153-174]
  • Dynamic simulation Performance Evaluation and Torque Control in a Bio-Inspired Flapping-Wing Micro Aerial Vehicle Modeled After a Hummingbird [Volume 4, Issue 1, 2025, Pages 21-46]
E
  • ECAP Experimental investigation of workability of age-hardened Aluminum 7075 in ECAP process [(Articles in Press)]
  • Economic Analysis Thermodynamic and Economic Analysis of a New Multiple Generation System Combined with Compressed Air Energy Storage and Sulfur Dioxide-Based Ejector Cooling System. [Volume 3, Issue 1, 2024, Pages 7-21]
  • EES Investigating the effect of environmental conditions and fuel type on the energy and exergy parameters of a steam power plant [Volume 3, Issue 2, 2024, Pages 19-32]
  • EF7 engine Numerical simulation of EF7 engine in different operating conditions [Volume 2, Issue 2, 2023, Pages 101-109]
  • Efficiency Investigation of the Effect of Packing Type on Thermal Performance of a Wet Cooling Tower Using Nanofluid Flow [Volume 4, Issue 1, 2025, Pages 203-216]
  • Ejector refrigeration Thermodynamic and Economic Analysis of a New Multiple Generation System Combined with Compressed Air Energy Storage and Sulfur Dioxide-Based Ejector Cooling System. [Volume 3, Issue 1, 2024, Pages 7-21]
  • Elastic properties Determination of Orthotropic Elastic Properties and Study of Size Effect of Single-Layer and Double-Layer Graphene Nanoplates Using Atomic Finite Element Method [Volume 3, Issue 2, 2024, Pages 99-117]
  • Electrical discharge machining (EDM) Experimental Evaluation of EDM Parameters for MO40 Steel Using RSM and Thermal Heat-Flux Analysis [(Articles in Press)]
  • Elliptical deflector Numerical Investigation of the Effect of Elliptical Deflectors with Different Aspect Ratios on the Aerodynamic Performance of a Savonius Wind Turbine [(Articles in Press)]
  • Energy absorption Fabrication and Investigation of Mechanical Properties of Copper Alloy Matrix Composite Reinforced with Micron Diamond Particles [Volume 3, Issue 1, 2024, Pages 117-132]
  • Energy absorption Preparation of Al-B4C Composite by Mechanical Alloying Method and Investigation of Its Thermomechanical Properties [Volume 3, Issue 1, 2024, Pages 163-183]
  • Energy and Exergy Analysis Investigating the effect of environmental conditions and fuel type on the energy and exergy parameters of a steam power plant [Volume 3, Issue 2, 2024, Pages 19-32]
  • Energy and Exergy Analysis Design Point and Off-Design Simulation of a Gas Turbine–Solar Power Plant [(Articles in Press)]
  • Energy optimization A Review on the Various Solutions to Improve the Performance of the Solar Collector Absorber Tube by Using Turbulator and Hybrid Nanofluid [Volume 3, Issue 1, 2024, Pages 43-72]
  • Energy optimization Dynamic evaluation of the effect of cavity depth in a double-skin façade with hybrid panels on seasonal energy performance [(Articles in Press)]
  • Engine Investigating the effect of spark plug and wire health on gasoline engine exhaust emissions [Volume 3, Issue 2, 2024, Pages 7-18]
  • Environment Investigating the effect of spark plug and wire health on gasoline engine exhaust emissions [Volume 3, Issue 2, 2024, Pages 7-18]
  • Evaporation Rate Development and experimental assessment of an Evaporative cooling system with Wetting surfaces [(Articles in Press)]
  • Evaporative Cooling Feasibility Study of Natural Ventilation Potential of Residential Buildings for Different Climates in Iran [Volume 3, Issue 1, 2024, Pages 185-206]
  • Exergy Thermodynamic and Economic Analysis of a New Multiple Generation System Combined with Compressed Air Energy Storage and Sulfur Dioxide-Based Ejector Cooling System. [Volume 3, Issue 1, 2024, Pages 7-21]
  • Exergy analysis Energy and Exergy Assessment of a Novel Combined Geothermal–LNG Cycle with Energy Recovery and Green Hydrogen Production [Volume 4, Issue 1, 2025, Pages 217-235]
  • Exergy destruction rate Investigating the effect of environmental conditions and fuel type on the energy and exergy parameters of a steam power plant [Volume 3, Issue 2, 2024, Pages 19-32]
  • Experimental analysis Experimental Analysis of the Impact of Fuel Pressure and Filter Clogging on the Spray Rate of Automotive Fuel Injectors [Volume 3, Issue 2, 2024, Pages 69-79]
  • Experimental Evaluation Numerical and Experimental study of a new building cooling system based on compression refrigeration cycle [Volume 1, Issue 1, 2023, Pages 126-137]
F
  • Failure cause Failure analysis of six-cylinder passenger car engine camshaft [Volume 1, Issue 1, 2023, Pages 70-82]
  • Fatigue Analysis Influence of cylindrical slotted holes on the fatigue performance of overhead crane wheels [(Articles in Press)]
  • Fatigue life estimation Experimental Study on Bending Fatigue of 3D-Printed Specimens Fabricated via Fused Deposition Modeling [Volume 3, Issue 2, 2024, Pages 119-136]
  • FEM Influence of cylindrical slotted holes on the fatigue performance of overhead crane wheels [(Articles in Press)]
  • Filter blockage Experimental Analysis of the Impact of Fuel Pressure and Filter Clogging on the Spray Rate of Automotive Fuel Injectors [Volume 3, Issue 2, 2024, Pages 69-79]
  • Finite element model Star structure layout of recreational airplane to reduce stress in unsymmetric flight [(Articles in Press)]
  • Finite element simulation Residual stress distribution in Inconel 625 superalloy samples obtained from the selective laser melting (SLM) process using the finite element method [Volume 2, Issue 1, 2023, Pages 87-99]
  • Flame Flashback Presenting an Innovative Model Based on Physical Criteria for Accurate Prediction of Flame Flashback Phenomenon in Methane-Air Premixed Burners Using Automatic Calibration and Experimental Validation [(Articles in Press)]
  • Flapping-Wing Mechanism Performance Evaluation and Torque Control in a Bio-Inspired Flapping-Wing Micro Aerial Vehicle Modeled After a Hummingbird [Volume 4, Issue 1, 2025, Pages 21-46]
  • FlexPDE Creep analysis of visco-hyperelastic non-uniform rotating disks [Volume 2, Issue 1, 2023, Pages 115-132]
  • Flow Rate Investigation of the Effect of Packing Type on Thermal Performance of a Wet Cooling Tower Using Nanofluid Flow [Volume 4, Issue 1, 2025, Pages 203-216]
  • Forming force Investigating the effect of friction coefficient on the forming force of copper sheet in the pressing process in bound groove molds [Volume 2, Issue 2, 2023, Pages 79-89]
  • Fractional Order Improving the spacecraft attitude control performance with on-off thruster actuator and fractional order pulse-width pulse-frequency modulator [Volume 2, Issue 2, 2023, Pages 21-32]
  • Fractography Failure analysis of six-cylinder passenger car engine camshaft [Volume 1, Issue 1, 2023, Pages 70-82]
  • Free vibration Investigation of Imperfection Effects in Dynamic Behavior of FG Strucure [Volume 2, Issue 1, 2023, Pages 133-144]
  • Fuel Cell Off-Design Performance Analysis of a Solid Oxide Fuel Cell–Gas Turbine Hybrid System Based on Optimal Design Conditions [(Articles in Press)]
  • Fuel consumption Experimental Analysis of the Impact of Fuel Pressure and Filter Clogging on the Spray Rate of Automotive Fuel Injectors [Volume 3, Issue 2, 2024, Pages 69-79]
G
  • Gas Heater Investigating the wall temperature on the chimney suction of gas-burning appliances using two-phase flow [(Articles in Press)]
  • Gas turbine Advanced Thermodynamic Analysis and Performance Enhancement of Gas Turbine Cycles with Intercooler and Recuperator [(Articles in Press)]
  • Gas turbine Off-Design Performance Analysis of a Solid Oxide Fuel Cell–Gas Turbine Hybrid System Based on Optimal Design Conditions [(Articles in Press)]
  • Gas turbine–solar hybrid Design Point and Off-Design Simulation of a Gas Turbine–Solar Power Plant [(Articles in Press)]
  • Gear Numerical study of subsurface crack growth in the spalling phenomenon of a spur gear tooth [Volume 4, Issue 2, 2025, Pages 257-269]
  • Gearbox Investigating the effect of environmental conditions and fuel type on the energy and exergy parameters of a steam power plant [Volume 3, Issue 2, 2024, Pages 19-32]
  • Gearbox Design, Evaluation and Construction of a Test Rig For Predicting the Remaining Usefull Life of a Gearbox with a Spur Gear [Volume 3, Issue 2, 2024, Pages 33-46]
  • Generalized Maxwell model of visco-hyperelasticity Creep analysis of visco-hyperelastic non-uniform rotating disks [Volume 2, Issue 1, 2023, Pages 115-132]
  • Genetic Algorithm Geometrical Optimization of a Railway Rail Using Modal Analysis to Improve Vibrational and Stress Responses [Volume 4, Issue 2, 2025, Pages 99-111]
  • Genetic Algorithm Satellite Orbit Determination by Integrating Orbital Dynamics and Genetic Algorithm Based on Ground Track Points: A Passive and Independent Approach [(Articles in Press)]
  • Genetic optimization algorithm Routing for unmanned flying robots in expedited order delivery within distribution networks and online customer service platforms [Volume 2, Issue 2, 2023, Pages 111-125]
  • Geometrical optimization Geometrical Optimization of a Railway Rail Using Modal Analysis to Improve Vibrational and Stress Responses [Volume 4, Issue 2, 2025, Pages 99-111]
  • Geothermal Energy Thermodynamic, Economic and Optimization Analysis of a New Geothermal Energy-Based Multiple Generation System for Hot Water, Cooling, Power and Liquid Hydrogen Production [Volume 3, Issue 1, 2024, Pages 207-225]
  • Geothermal Energy Thermoeconomics Analysis and Optimization of a Geothermal-Based Power and Heat Generation System Using Genetic Algorithm [Volume 4, Issue 1, 2025, Pages 183-201]
  • Geothermal Energy Energy and Exergy Assessment of a Novel Combined Geothermal–LNG Cycle with Energy Recovery and Green Hydrogen Production [Volume 4, Issue 1, 2025, Pages 217-235]
  • Ggraphene nanoplate Determination of Orthotropic Elastic Properties and Study of Size Effect of Single-Layer and Double-Layer Graphene Nanoplates Using Atomic Finite Element Method [Volume 3, Issue 2, 2024, Pages 99-117]
  • Glass fibers Enhancement of Mechanical and Thermal Properties of Injection-Molded Polypropylene Parts Using Glass Fibers [(Articles in Press)]
  • Granular Material Effects of vibrator characteristics on uncloging and outflow of silo containing granular material-DEM approach [Volume 1, Issue 1, 2023, Pages 39-57]
  • Green hydrogen Energy and Exergy Assessment of a Novel Combined Geothermal–LNG Cycle with Energy Recovery and Green Hydrogen Production [Volume 4, Issue 1, 2025, Pages 217-235]
  • Green hydrogen Emerging renewable energy generation technologies: Investigating the impact of these technologies on the convergence of CAP and actual generation in Iran on a global scale [(Articles in Press)]
H
  • Halpin-Tsai model Analytical review of nanocomposites: integrating multiscale modeling, micromechanics, and kinetics of nanoparticle synthesis with investigation of matrix effects on mechanical performance in advanced applications [(Articles in Press)]
  • Hamilton’s Principal Investigation of Imperfection Effects in Dynamic Behavior of FG Strucure [Volume 2, Issue 1, 2023, Pages 133-144]
  • Hardness Investigating the effect of friction coefficient on the forming force of copper sheet in the pressing process in bound groove molds [Volume 2, Issue 2, 2023, Pages 79-89]
  • Hardware in the loop Design and Construction of a Two-Axis Angle Control Testbed with a Hardware-in-the-Loop Approach [Volume 3, Issue 1, 2024, Pages 147-161]
  • Heat Pump؛ Hybrid Solar collector؛ Direct Expansion Eystem؛ Indirect Expansion System An Overview of combining hybrid solar collector and heat pump methods [Volume 4, Issue 1, 2025, Pages 67-91]
  • Heat Transfer Coefficient The effect of hot fluid and Nanotube-Water Flow Rate on the Efficiency of Nanofluid on Gasket-plate heat exchanger [Volume 1, Issue 1, 2023, Pages 100-112]
  • Heat Transfer Coefficient A Review on Heat Transfer Coefficient Measuring Methods in Bulk and Film Specimens [Volume 2, Issue 2, 2023, Pages 57-77]
  • Heat transfer enhancement Numerical Simulation of the Effect of Conventional and Hybrid Nanofluids on the Cooling Performance of Automobile Radiator [Volume 3, Issue 2, 2024, Pages 137-151]
  • Heat transfer enhancement Numerical Modeling of the Geometry of Helically Finned Tubes in Shell-and-Tube Heat Exchangers for Enhanced Heat Transfer and Reduced Pressure Drop [(Articles in Press)]
  • Helical Grooves Numerical Modeling of the Geometry of Helically Finned Tubes in Shell-and-Tube Heat Exchangers for Enhanced Heat Transfer and Reduced Pressure Drop [(Articles in Press)]
  • Heparin Design and Simulation of Polycationic Nano-Linkers for Connecting Polyanions Together [Volume 3, Issue 2, 2024, Pages 193-211]
  • Hierarchical Thin-Walled Structures Fabrication and Investigation of Mechanical Properties of Copper Alloy Matrix Composite Reinforced with Micron Diamond Particles [Volume 3, Issue 1, 2024, Pages 117-132]
  • Hierarchical Thin-Walled Structures Preparation of Al-B4C Composite by Mechanical Alloying Method and Investigation of Its Thermomechanical Properties [Volume 3, Issue 1, 2024, Pages 163-183]
  • Hot Metal Gas Forming Investigating the effect of process parameters on gas forming of AA6063 aluminum tube at hot temperature using response surface method [Volume 1, Issue 1, 2023, Pages 83-99]
  • Hummingbird Performance Evaluation and Torque Control in a Bio-Inspired Flapping-Wing Micro Aerial Vehicle Modeled After a Hummingbird [Volume 4, Issue 1, 2025, Pages 21-46]
  • Hybrid Numerical Simulation of the Effect of Conventional and Hybrid Nanofluids on the Cooling Performance of Automobile Radiator [Volume 3, Issue 2, 2024, Pages 137-151]
  • Hybrid Model Presenting an Innovative Model Based on Physical Criteria for Accurate Prediction of Flame Flashback Phenomenon in Methane-Air Premixed Burners Using Automatic Calibration and Experimental Validation [(Articles in Press)]
  • Hybrid models Comparison and Review of the Application of Deep Learning Models in Forecasting Electrical Energy Generation of Photovoltaic Systems with a Focus on LSTM and Hybrid Models [(Articles in Press)]
I
  • Ignition system Investigating the effect of spark plug and wire health on gasoline engine exhaust emissions [Volume 3, Issue 2, 2024, Pages 7-18]
  • Imperfect FGM Investigation of Imperfection Effects in Dynamic Behavior of FG Strucure [Volume 2, Issue 1, 2023, Pages 133-144]
  • Inconel 625 Residual stress distribution in Inconel 625 superalloy samples obtained from the selective laser melting (SLM) process using the finite element method [Volume 2, Issue 1, 2023, Pages 87-99]
  • Incremental Sheet Forming Experimental investigation of forming AISI 304 stainless steel sheets using high water pressure [(Articles in Press)]
  • Industrial applications Mathematical modeling of a thermally driven multistage desalination system (MED) for industrial applications [Volume 4, Issue 2, 2025, Pages 83-97]
  • Industrial Packings Investigation of Effective Parameters in the Sealing System of Rotating Shaft Packings Based on Operational Conditions [Volume 4, Issue 1, 2025, Pages 125-146]
  • Installed capacity for electricity generation (CAP) Emerging renewable energy generation technologies: Investigating the impact of these technologies on the convergence of CAP and actual generation in Iran on a global scale [(Articles in Press)]
  • Intercooler Advanced Thermodynamic Analysis and Performance Enhancement of Gas Turbine Cycles with Intercooler and Recuperator [(Articles in Press)]
  • Internal combustion engine Experimental Investigation of the Effect of Fuel Injection Timing on the Combustion Regime of the Direct-Injection Internal Combustion Engine – Transition from Conventional Compression Ignition Combustion to Low Temperature Combustion [Volume 3, Issue 1, 2024, Pages 133-146]
  • Internal Pressure Buckling and Post-Buckling Analysis of Composite Pipe Reinforced with Shape Memory Alloy under Internal Pressure [Volume 4, Issue 2, 2025, Pages 205-218]
  • Interval Fuzzy Control System Finding the optimal position of the DME with the aim of reducing probability airplane landing error in non-ideal conditions [Volume 2, Issue 2, 2023, Pages 127-136]
  • Iran's Climate Conditions Feasibility Study of Natural Ventilation Potential of Residential Buildings for Different Climates in Iran [Volume 3, Issue 1, 2024, Pages 185-206]
  • Iron production Studying effects of pelletizing process parameters on the main properties of iron ore green pellets-laboratory approach [Volume 2, Issue 2, 2023, Pages 7-19]
J
  • Jet Pressure Experimental investigation of forming AISI 304 stainless steel sheets using high water pressure [(Articles in Press)]
K
  • Köppen-Geiger Climatology Feasibility Study of Natural Ventilation Potential of Residential Buildings for Different Climates in Iran [Volume 3, Issue 1, 2024, Pages 185-206]
L
  • Landing Approximation Finding the optimal position of the DME with the aim of reducing probability airplane landing error in non-ideal conditions [Volume 2, Issue 2, 2023, Pages 127-136]
  • Layers Determination of Orthotropic Elastic Properties and Study of Size Effect of Single-Layer and Double-Layer Graphene Nanoplates Using Atomic Finite Element Method [Volume 3, Issue 2, 2024, Pages 99-117]
  • Linear and non-linear regressions Experimental Study on Bending Fatigue of 3D-Printed Specimens Fabricated via Fused Deposition Modeling [Volume 3, Issue 2, 2024, Pages 119-136]
  • LNG cold energy Energy and Exergy Assessment of a Novel Combined Geothermal–LNG Cycle with Energy Recovery and Green Hydrogen Production [Volume 4, Issue 1, 2025, Pages 217-235]
  • Long Short-Term Memory Networks Comparison and Review of the Application of Deep Learning Models in Forecasting Electrical Energy Generation of Photovoltaic Systems with a Focus on LSTM and Hybrid Models [(Articles in Press)]
  • Low Temperature Combustion Experimental Investigation of the Effect of Fuel Injection Timing on the Combustion Regime of the Direct-Injection Internal Combustion Engine – Transition from Conventional Compression Ignition Combustion to Low Temperature Combustion [Volume 3, Issue 1, 2024, Pages 133-146]
M
  • Machine Learning Real-time fault-tolerant controller of induction motors using optimized CNN-LSTM deep neural network based on vibration-acoustic data and proposed control algorithm [Volume 4, Issue 2, 2025, Pages 113-138]
  • Magnetic field Numerical study of the effect of magnetic field on velocity and pressure drop of magneto hydrodynamic fluid in blanket [Volume 1, Issue 1, 2023, Pages 113-125]
  • Magneto hydrodynamics Numerical study of the effect of magnetic field on velocity and pressure drop of magneto hydrodynamic fluid in blanket [Volume 1, Issue 1, 2023, Pages 113-125]
  • Marine propellers Numerical Analysis of the Effect of Rake Angle on Hydrodynamic and Hydroacoustic Performance of DTMB Marine Propeller [Volume 3, Issue 2, 2024, Pages 81-98]
  • Mass Analysis of Mindlin Plates by Dynamic Relaxation Method [Volume 4, Issue 2, 2025, Pages 153-174]
  • Material handling Study the influencing parameters on performance of screw conveyor in order to redesign it in ShahreBabak copper complex [Volume 2, Issue 2, 2023, Pages 49-56]
  • Material Removal Rate (MRR) Experimental Evaluation of EDM Parameters for MO40 Steel Using RSM and Thermal Heat-Flux Analysis [(Articles in Press)]
  • Mathematical Modeling Mathematical modeling of a thermally driven multistage desalination system (MED) for industrial applications [Volume 4, Issue 2, 2025, Pages 83-97]
  • Mechanical Behavior Modeling and investigating the behavior of triangular origami DNA under the influence of laboratory temperature [Volume 1, Issue 1, 2023, Pages 58-69]
  • Mechanical properties Investigation of the Effect of Diamond Additive Percentage on the Mechanical and Wear Properties of Bronze-Diamond Composite for Use in Industries [Volume 4, Issue 2, 2025, Pages 7-25]
  • Mechanical properties Evaluation of mechanical properties of ultrafine-grained pure titanium produced via warm ECAP process by concurrently utilizing casing and back pressure [Volume 4, Issue 2, 2025, Pages 47-63]
  • Mechanical properties Enhancement of Mechanical and Thermal Properties of Injection-Molded Polypropylene Parts Using Glass Fibers [(Articles in Press)]
  • Micro Aerial Vehicle (MAV) Performance Evaluation and Torque Control in a Bio-Inspired Flapping-Wing Micro Aerial Vehicle Modeled After a Hummingbird [Volume 4, Issue 1, 2025, Pages 21-46]
  • Microstructure Failure analysis of six-cylinder passenger car engine camshaft [Volume 1, Issue 1, 2023, Pages 70-82]
  • Mindlin plate Analysis of Mindlin Plates by Dynamic Relaxation Method [Volume 4, Issue 2, 2025, Pages 153-174]
  • MO40 Steel Experimental Evaluation of EDM Parameters for MO40 Steel Using RSM and Thermal Heat-Flux Analysis [(Articles in Press)]
  • Modal Analysis Analytical Evaluation of 2-stage Pusher Centrifuge Dynamic Performance [Volume 3, Issue 1, 2024, Pages 93-115]
  • Modal Analysis Geometrical Optimization of a Railway Rail Using Modal Analysis to Improve Vibrational and Stress Responses [Volume 4, Issue 2, 2025, Pages 99-111]
  • Modal Analysis Modeling and Estimation of Spectral Stretching in Aluminum Beam Frequency Response Function Signals Using Experimental Modal Analysis and Adaptive Signal Processing [Volume 4, Issue 2, 2025, Pages 219-240]
  • Mode II Experimental Investigation of Adhesively Bonded Composite–Composite Joints under Varied Loading Conditions Using U Shaped Arcan Specimens [Volume 4, Issue 2, 2025, Pages 139-151]
  • Modeling Investigating the effect of friction coefficient on the forming force of copper sheet in the pressing process in bound groove molds [Volume 2, Issue 2, 2023, Pages 79-89]
  • Modified PID Improving the performance of satellite attitude control with a reaction wheel actuator and considering sensor noise [Volume 2, Issue 1, 2023, Pages 67-76]
  • Modified PID Improving the performance of satellite attitude control with a reaction wheel actuator and considering sensor noise [Volume 2, Issue 2, 2023, Pages 91-100]
  • Moisture Studying effects of pelletizing process parameters on the main properties of iron ore green pellets-laboratory approach [Volume 2, Issue 2, 2023, Pages 7-19]
  • Molecular Dynamics Simulation Modeling and investigating the behavior of triangular origami DNA under the influence of laboratory temperature [Volume 1, Issue 1, 2023, Pages 58-69]
  • Molecular Dynamics Simulation Design and Simulation of Polycationic Nano-Linkers for Connecting Polyanions Together [Volume 3, Issue 2, 2024, Pages 193-211]
  • Multigeneration Systems Energy and Exergy Assessment of a Novel Combined Geothermal–LNG Cycle with Energy Recovery and Green Hydrogen Production [Volume 4, Issue 1, 2025, Pages 217-235]
  • Multi-stage desalination plant Mathematical modeling of a thermally driven multistage desalination system (MED) for industrial applications [Volume 4, Issue 2, 2025, Pages 83-97]
N
  • Nanofluid Increasing the stability of nanofluids and its estimation methods [Volume 1, Issue 1, 2023, Pages 7-19]
  • Nanofluid Experimental Study on Enhancement of Heat Transfer in Peugeot 206 Radiator Using Oxide Nanofluids [Volume 4, Issue 1, 2025, Pages 107-123]
  • Nanofluid Development of a New Empirical Model for Predicting Thermal Conductivity of ZnO-Ethylene Glycol Nanofluid Based on Temperature, Particle Size, and Concentration [Volume 4, Issue 2, 2025, Pages 175-189]
  • Nanofluids Numerical Simulation of the Effect of Conventional and Hybrid Nanofluids on the Cooling Performance of Automobile Radiator [Volume 3, Issue 2, 2024, Pages 137-151]
  • Nanomaterials Analytical review of nanocomposites: integrating multiscale modeling, micromechanics, and kinetics of nanoparticle synthesis with investigation of matrix effects on mechanical performance in advanced applications [(Articles in Press)]
  • Nanoparticle cloud combustion Mathematical modeling of nanoparticle cloud combustion considering particle phase change in the reaction zone in a non-premixed combustion system with counterflow configuration [(Articles in Press)]
  • Nanoparticle Diameter Development of a New Empirical Model for Predicting Thermal Conductivity of ZnO-Ethylene Glycol Nanofluid Based on Temperature, Particle Size, and Concentration [Volume 4, Issue 2, 2025, Pages 175-189]
  • Nanoparticles Increasing the stability of nanofluids and its estimation methods [Volume 1, Issue 1, 2023, Pages 7-19]
  • Natural age hardening Experimental investigation of workability of age-hardened Aluminum 7075 in ECAP process [(Articles in Press)]
  • Natural gas Investigating the effect of environmental conditions and fuel type on the energy and exergy parameters of a steam power plant [Volume 3, Issue 2, 2024, Pages 19-32]
  • Navier method Investigation of Imperfection Effects in Dynamic Behavior of FG Strucure [Volume 2, Issue 1, 2023, Pages 133-144]
  • Navigation Systems Finding the Optimal Position of the Distance Measuring Device with the Aim of Reducing Risk and Uncertainty in the Aircraft Landing Phase [Volume 3, Issue 1, 2024, Pages 227-238]
  • New hyperbolic theory Investigation of Imperfection Effects in Dynamic Behavior of FG Strucure [Volume 2, Issue 1, 2023, Pages 133-144]
  • Noise Numerical Analysis of the Effect of Rake Angle on Hydrodynamic and Hydroacoustic Performance of DTMB Marine Propeller [Volume 3, Issue 2, 2024, Pages 81-98]
  • Non-Newtonian Fluid Numerical Analysis of Blood Interaction in a Vessel with a Flexible Wall [Volume 1, Issue 1, 2023, Pages 20-38]
  • Non-Newtonian power-law model Three-dimensional heat transfer simulation of a non-Newtonian droplet considering the effects of surface evaporation [Volume 2, Issue 1, 2023, Pages 41-49]
  • Non-premixed combustion Mathematical modeling of nanoparticle cloud combustion considering particle phase change in the reaction zone in a non-premixed combustion system with counterflow configuration [(Articles in Press)]
  • Non-uniform polymeric rotating disk Creep analysis of visco-hyperelastic non-uniform rotating disks [Volume 2, Issue 1, 2023, Pages 115-132]
  • Nuclear fusion Numerical study of the effect of magnetic field on velocity and pressure drop of magneto hydrodynamic fluid in blanket [Volume 1, Issue 1, 2023, Pages 113-125]
  • Numerical analysis Numerical Analysis of Blood Interaction in a Vessel with a Flexible Wall [Volume 1, Issue 1, 2023, Pages 20-38]
  • Numerical evaluation Numerical and Experimental study of a new building cooling system based on compression refrigeration cycle [Volume 1, Issue 1, 2023, Pages 126-137]
  • Numerical Study Numerical study of the effect of magnetic field on velocity and pressure drop of magneto hydrodynamic fluid in blanket [Volume 1, Issue 1, 2023, Pages 113-125]
O
  • Oil refinery Pinch analysis and simulation of Bu Ali Sina crude oil refinery unit [Volume 2, Issue 2, 2023, Pages 33-47]
  • Optimal design Investigation of Effective Parameters in the Sealing System of Rotating Shaft Packings Based on Operational Conditions [Volume 4, Issue 1, 2025, Pages 125-146]
  • Optimization of energy Numerical and Analytical Study of the Effect of Different Architectural Geometries on the Stack Effect and Energy Consumption in Tall Buildings [Volume 2, Issue 1, 2023, Pages 183-198]
  • Optimum landing Finding the Optimal Position of the Distance Measuring Device with the Aim of Reducing Risk and Uncertainty in the Aircraft Landing Phase [Volume 3, Issue 1, 2024, Pages 227-238]
  • Optimum tillage operations Design and construction of a multi-purpose agricultural rotator with movable arms [Volume 4, Issue 2, 2025, Pages 27-45]
  • Orbital Dynamics Satellite Orbit Determination by Integrating Orbital Dynamics and Genetic Algorithm Based on Ground Track Points: A Passive and Independent Approach [(Articles in Press)]
  • Orbit Determination Satellite Orbit Determination by Integrating Orbital Dynamics and Genetic Algorithm Based on Ground Track Points: A Passive and Independent Approach [(Articles in Press)]
  • Organic Rankine Cycle Energy and exergy analysis of the organic Rankine cycle used for recovering waste heat from the cement industry [Volume 2, Issue 1, 2023, Pages 7-25]
  • Organic Rankine Cycle Investigating the sustainability of diesel, biodiesel and hydrogen fuels in diesel engines with the approach of sustainable development analysis [Volume 2, Issue 1, 2023, Pages 101-113]
  • Organic Rankine Cycle Entropy generation minimization of confined nanofluids laminar flow around a block [Volume 2, Issue 1, 2023, Pages 77-85]
  • Origami DNA Modeling and investigating the behavior of triangular origami DNA under the influence of laboratory temperature [Volume 1, Issue 1, 2023, Pages 58-69]
  • Overhead crane Influence of cylindrical slotted holes on the fatigue performance of overhead crane wheels [(Articles in Press)]
  • Overset Grid Numerical Analysis of Unsteady Aerodynamic Interference between Two Adjacent Moving objects [Volume 4, Issue 1, 2025, Pages 7-19]
P
  • Packaging Investigating the Impact of Three Recycling Cycles on the Thermal and Mechanical Properties of Composites Made from Aspen Wood Flour and Recycled Polyethylene for Packaging Applications [Volume 4, Issue 1, 2025, Pages 93-105]
  • Peak Cooler Numerical Study of the Effect of Peak Cooler Structure on Airflow and Efficiency of Dry Cooling Tower [Volume 3, Issue 2, 2024, Pages 173-191]
  • Pelletizing disk Studying effects of pelletizing process parameters on the main properties of iron ore green pellets-laboratory approach [Volume 2, Issue 2, 2023, Pages 7-19]
  • Performance Map Off-Design Performance Analysis of a Solid Oxide Fuel Cell–Gas Turbine Hybrid System Based on Optimal Design Conditions [(Articles in Press)]
  • Physical criteria Presenting an Innovative Model Based on Physical Criteria for Accurate Prediction of Flame Flashback Phenomenon in Methane-Air Premixed Burners Using Automatic Calibration and Experimental Validation [(Articles in Press)]
  • PID Controller Design and Construction of a Two-Axis Angle Control Testbed with a Hardware-in-the-Loop Approach [Volume 3, Issue 1, 2024, Pages 147-161]
  • Pinch analysis Pinch analysis and simulation of Bu Ali Sina crude oil refinery unit [Volume 2, Issue 2, 2023, Pages 33-47]
  • Pine wood flour؛ recycled polypropylene؛ flexural strength؛ flexural modulus؛ nanosilica Reinforcement Effect of Nanosilica on the Mechanical and Thermal Performance of Pine Wood Flour/Recycled Polypropylene Hybrid Composites [Volume 4, Issue 2, 2025, Pages 241-255]
  • PLA polymer Experimental Study on Bending Fatigue of 3D-Printed Specimens Fabricated via Fused Deposition Modeling [Volume 3, Issue 2, 2024, Pages 119-136]
  • Pollutant Investigating the effect of spark plug and wire health on gasoline engine exhaust emissions [Volume 3, Issue 2, 2024, Pages 7-18]
  • Polycationic nano-linker Design and Simulation of Polycationic Nano-Linkers for Connecting Polyanions Together [Volume 3, Issue 2, 2024, Pages 193-211]
  • Polymer composites Enhancement of Mechanical and Thermal Properties of Injection-Molded Polypropylene Parts Using Glass Fibers [(Articles in Press)]
  • Porous media Prediction and simulation of diffusion of a droplet in a porous media using two-phase control volume [Volume 2, Issue 1, 2023, Pages 27-40]
  • Porous structures Modeling and Comparison of Mechanical Properties of Porous Minimal Structures of Schwarz P, Diamond and Gyriod [Volume 4, Issue 1, 2025, Pages 47-66]
  • Position control Design and Construction of a Two-Axis Angle Control Testbed with a Hardware-in-the-Loop Approach [Volume 3, Issue 1, 2024, Pages 147-161]
  • Post-buckling behavior Buckling and Post-Buckling Analysis of Composite Pipe Reinforced with Shape Memory Alloy under Internal Pressure [Volume 4, Issue 2, 2025, Pages 205-218]
  • Power Enhancement Numerical Investigation of the Effect of Elliptical Deflectors with Different Aspect Ratios on the Aerodynamic Performance of a Savonius Wind Turbine [(Articles in Press)]
  • Premixed Burner Presenting an Innovative Model Based on Physical Criteria for Accurate Prediction of Flame Flashback Phenomenon in Methane-Air Premixed Burners Using Automatic Calibration and Experimental Validation [(Articles in Press)]
  • Pressure distribution Numerical Analysis of Unsteady Aerodynamic Interference between Two Adjacent Moving objects [Volume 4, Issue 1, 2025, Pages 7-19]
  • Pressure drop Numerical study of the effect of magnetic field on velocity and pressure drop of magneto hydrodynamic fluid in blanket [Volume 1, Issue 1, 2023, Pages 113-125]
  • Pressure drop Numerical Analysis of the Impact of Vortex Finder Diameter Ratio on Cyclone Performance [(Articles in Press)]
  • Product growth Design and construction of a multi-purpose agricultural rotator with movable arms [Volume 4, Issue 2, 2025, Pages 27-45]
  • Productivity Design and construction of a multi-purpose agricultural rotator with movable arms [Volume 4, Issue 2, 2025, Pages 27-45]
  • Pulse-Width Pulse-Frequency Modulator Improving the spacecraft attitude control performance with on-off thruster actuator and fractional order pulse-width pulse-frequency modulator [Volume 2, Issue 2, 2023, Pages 21-32]
  • Pure titanium Evaluation of mechanical properties of ultrafine-grained pure titanium produced via warm ECAP process by concurrently utilizing casing and back pressure [Volume 4, Issue 2, 2025, Pages 47-63]
  • Pusher centrifuge Analytical Evaluation of 2-stage Pusher Centrifuge Dynamic Performance [Volume 3, Issue 1, 2024, Pages 93-115]
R
  • Radiator Experimental Study on Enhancement of Heat Transfer in Peugeot 206 Radiator Using Oxide Nanofluids [Volume 4, Issue 1, 2025, Pages 107-123]
  • Railway rail Geometrical Optimization of a Railway Rail Using Modal Analysis to Improve Vibrational and Stress Responses [Volume 4, Issue 2, 2025, Pages 99-111]
  • Reaction wheel Improving the performance of satellite attitude control with a reaction wheel actuator and considering sensor noise [Volume 2, Issue 1, 2023, Pages 67-76]
  • Reaction wheel Improving the performance of satellite attitude control with a reaction wheel actuator and considering sensor noise [Volume 2, Issue 2, 2023, Pages 91-100]
  • Recreational Multirotor Star structure layout of recreational airplane to reduce stress in unsymmetric flight [(Articles in Press)]
  • Recuperator Advanced Thermodynamic Analysis and Performance Enhancement of Gas Turbine Cycles with Intercooler and Recuperator [(Articles in Press)]
  • Recycling؛ Thermal Properties؛ Recycled Polyethylene Investigating the Impact of Three Recycling Cycles on the Thermal and Mechanical Properties of Composites Made from Aspen Wood Flour and Recycled Polyethylene for Packaging Applications [Volume 4, Issue 1, 2025, Pages 93-105]
  • Reduced graphene Oxide Investigation of the corrosion resistance and hardness of 316L steel with reduced graphene oxide/boron carbide/titanium carbide coating deposited by laser method [(Articles in Press)]
  • Reinforced polypropylene Enhancement of Mechanical and Thermal Properties of Injection-Molded Polypropylene Parts Using Glass Fibers [(Articles in Press)]
  • Remaining useful life Design, Evaluation and Construction of a Test Rig For Predicting the Remaining Usefull Life of a Gearbox with a Spur Gear [Volume 3, Issue 2, 2024, Pages 33-46]
  • Remaining Useful Life Vibration Analysis Investigating the effect of environmental conditions and fuel type on the energy and exergy parameters of a steam power plant [Volume 3, Issue 2, 2024, Pages 19-32]
  • Renewable Energies Emerging renewable energy generation technologies: Investigating the impact of these technologies on the convergence of CAP and actual generation in Iran on a global scale [(Articles in Press)]
  • Renewable Energy Comparison and Review of the Application of Deep Learning Models in Forecasting Electrical Energy Generation of Photovoltaic Systems with a Focus on LSTM and Hybrid Models [(Articles in Press)]
  • Residential Building Investigating the wall temperature on the chimney suction of gas-burning appliances using two-phase flow [(Articles in Press)]
  • Residual Char Reinforcement Effect of Nanosilica on the Mechanical and Thermal Performance of Pine Wood Flour/Recycled Polypropylene Hybrid Composites [Volume 4, Issue 2, 2025, Pages 241-255]
  • Residual Stress Residual stress distribution in Inconel 625 superalloy samples obtained from the selective laser melting (SLM) process using the finite element method [Volume 2, Issue 1, 2023, Pages 87-99]
  • Response Surface Methodology Investigating the effect of process parameters on gas forming of AA6063 aluminum tube at hot temperature using response surface method [Volume 1, Issue 1, 2023, Pages 83-99]
  • Response Surface Methodology Geometrical Optimization of a Railway Rail Using Modal Analysis to Improve Vibrational and Stress Responses [Volume 4, Issue 2, 2025, Pages 99-111]
  • Response surface methodology (RSM) Experimental Evaluation of EDM Parameters for MO40 Steel Using RSM and Thermal Heat-Flux Analysis [(Articles in Press)]
  • Returning Molecule Numerical investigation of the blade angle in the middle and final stages of a five-stage turbomolecular pump by considering the effect of returning molecules from other stages using the TPMC method [Volume 2, Issue 1, 2023, Pages 51-65]
  • Rotating fatigue test Experimental Study on Bending Fatigue of 3D-Printed Specimens Fabricated via Fused Deposition Modeling [Volume 3, Issue 2, 2024, Pages 119-136]
  • Rotating Shafts Investigation of Effective Parameters in the Sealing System of Rotating Shaft Packings Based on Operational Conditions [Volume 4, Issue 1, 2025, Pages 125-146]
  • Rotivator Design and construction of a multi-purpose agricultural rotator with movable arms [Volume 4, Issue 2, 2025, Pages 27-45]
S
  • Satellite attitude control Improving the performance of satellite attitude control with a reaction wheel actuator and considering sensor noise [Volume 2, Issue 1, 2023, Pages 67-76]
  • Satellite attitude control Improving the performance of satellite attitude control with a reaction wheel actuator and considering sensor noise [Volume 2, Issue 2, 2023, Pages 91-100]
  • Satellite Tracking Satellite Orbit Determination by Integrating Orbital Dynamics and Genetic Algorithm Based on Ground Track Points: A Passive and Independent Approach [(Articles in Press)]
  • Savonius wind turbine Numerical Investigation of the Effect of Elliptical Deflectors with Different Aspect Ratios on the Aerodynamic Performance of a Savonius Wind Turbine [(Articles in Press)]
  • Schwarz primitive؛ Schwarz diamond؛ Schwarz gyroid Modeling and Comparison of Mechanical Properties of Porous Minimal Structures of Schwarz P, Diamond and Gyriod [Volume 4, Issue 1, 2025, Pages 47-66]
  • Screw conveyor Study the influencing parameters on performance of screw conveyor in order to redesign it in ShahreBabak copper complex [Volume 2, Issue 2, 2023, Pages 49-56]
  • Screw feeder Study the influencing parameters on performance of screw conveyor in order to redesign it in ShahreBabak copper complex [Volume 2, Issue 2, 2023, Pages 49-56]
  • Screw slope Study the influencing parameters on performance of screw conveyor in order to redesign it in ShahreBabak copper complex [Volume 2, Issue 2, 2023, Pages 49-56]
  • Sea water Thermal analysis and cooling system design for marine brushless DC motor [Volume 2, Issue 1, 2023, Pages 145-156]
  • Second law of thermodynamics Analytical two-dimensional solution of the transport phenomena and analysis of entropy production during convective drying of a fruit slice [(Articles in Press)]
  • Semi-porous aluminum cavity The Effect of Aluminum Porous Network Characteristics on the Complete Melting Time of Coconut Oil and the Temperature Uniformity of the Wall [Volume 3, Issue 2, 2024, Pages 153-172]
  • Sensor Noise Improving the performance of satellite attitude control with a reaction wheel actuator and considering sensor noise [Volume 2, Issue 1, 2023, Pages 67-76]
  • Sensor Noise Improving the performance of satellite attitude control with a reaction wheel actuator and considering sensor noise [Volume 2, Issue 2, 2023, Pages 91-100]
  • Shape memory alloy Buckling and Post-Buckling Analysis of Composite Pipe Reinforced with Shape Memory Alloy under Internal Pressure [Volume 4, Issue 2, 2025, Pages 205-218]
  • Shell-and-Tube Heat Exchangers Numerical Modeling of the Geometry of Helically Finned Tubes in Shell-and-Tube Heat Exchangers for Enhanced Heat Transfer and Reduced Pressure Drop [(Articles in Press)]
  • Silo Effects of vibrator characteristics on uncloging and outflow of silo containing granular material-DEM approach [Volume 1, Issue 1, 2023, Pages 39-57]
  • Simulation Pinch analysis and simulation of Bu Ali Sina crude oil refinery unit [Volume 2, Issue 2, 2023, Pages 33-47]
  • Simulation Performance Enhancement of Photovoltaic-Thermal Panel Using Hybrid Nanofluids [Volume 3, Issue 2, 2024, Pages 47-67]
  • Simulation Numerical Study of the Effect of Peak Cooler Structure on Airflow and Efficiency of Dry Cooling Tower [Volume 3, Issue 2, 2024, Pages 173-191]
  • Solar energy Performance Enhancement of Photovoltaic-Thermal Panel Using Hybrid Nanofluids [Volume 3, Issue 2, 2024, Pages 47-67]
  • Solar energy Design Point and Off-Design Simulation of a Gas Turbine–Solar Power Plant [(Articles in Press)]
  • Solar Energy Prediction Comparison and Review of the Application of Deep Learning Models in Forecasting Electrical Energy Generation of Photovoltaic Systems with a Focus on LSTM and Hybrid Models [(Articles in Press)]
  • Spacecraft attitude control Improving the spacecraft attitude control performance with on-off thruster actuator and fractional order pulse-width pulse-frequency modulator [Volume 2, Issue 2, 2023, Pages 21-32]
  • Spalling Numerical study of subsurface crack growth in the spalling phenomenon of a spur gear tooth [Volume 4, Issue 2, 2025, Pages 257-269]
  • Spark plug Investigating the effect of spark plug and wire health on gasoline engine exhaust emissions [Volume 3, Issue 2, 2024, Pages 7-18]
  • Spermidine Design and Simulation of Polycationic Nano-Linkers for Connecting Polyanions Together [Volume 3, Issue 2, 2024, Pages 193-211]
  • Split system Numerical and Experimental study of a new building cooling system based on compression refrigeration cycle [Volume 1, Issue 1, 2023, Pages 126-137]
  • Stack Effect Numerical and Analytical Study of the Effect of Different Architectural Geometries on the Stack Effect and Energy Consumption in Tall Buildings [Volume 2, Issue 1, 2023, Pages 183-198]
  • Star-shaped structure layout Star structure layout of recreational airplane to reduce stress in unsymmetric flight [(Articles in Press)]
  • State space equations Routing for unmanned flying robots in expedited order delivery within distribution networks and online customer service platforms [Volume 2, Issue 2, 2023, Pages 111-125]
  • Steady and transient flow Effect of Elliptical Cylinder Arrangement on Turbulent Flow and Heat Transfer in Horizontal Channels [Volume 3, Issue 1, 2024, Pages 73-92]
  • Steam Power Plant Investigating the effect of environmental conditions and fuel type on the energy and exergy parameters of a steam power plant [Volume 3, Issue 2, 2024, Pages 19-32]
  • Stress analysis Star structure layout of recreational airplane to reduce stress in unsymmetric flight [(Articles in Press)]
  • Structural damage detection Data-driven and unsupervised damage detection in frame structures using deep neural networks [Volume 4, Issue 2, 2025, Pages 65-81]
  • Sulfur Dioxide Thermodynamic and Economic Analysis of a New Multiple Generation System Combined with Compressed Air Energy Storage and Sulfur Dioxide-Based Ejector Cooling System. [Volume 3, Issue 1, 2024, Pages 7-21]
  • Supersonic Numerical Study of the Effect of Sprinkler Structure during Water Discharge in Dry Fire Fighting System [Volume 2, Issue 1, 2023, Pages 157-166]
  • Supersonic flow Explaining the mechanical design of the middle space in the Bazar Markazi of Mashhad in order to reduce energy consumption and increase the thermal comfort of the audience. [Volume 2, Issue 1, 2023, Pages 167-182]
  • Supersonic flow Numerical Analysis of Unsteady Aerodynamic Interference between Two Adjacent Moving objects [Volume 4, Issue 1, 2025, Pages 7-19]
  • Surfactant The effect of hot fluid and Nanotube-Water Flow Rate on the Efficiency of Nanofluid on Gasket-plate heat exchanger [Volume 1, Issue 1, 2023, Pages 100-112]
  • Synthesis methods Analytical review of nanocomposites: integrating multiscale modeling, micromechanics, and kinetics of nanoparticle synthesis with investigation of matrix effects on mechanical performance in advanced applications [(Articles in Press)]
T
  • Taguchi The Effect of Aluminum Porous Network Characteristics on the Complete Melting Time of Coconut Oil and the Temperature Uniformity of the Wall [Volume 3, Issue 2, 2024, Pages 153-172]
  • Temperature uniformity index The Effect of Aluminum Porous Network Characteristics on the Complete Melting Time of Coconut Oil and the Temperature Uniformity of the Wall [Volume 3, Issue 2, 2024, Pages 153-172]
  • Test-Particle Monte Carlo Method Numerical investigation of the blade angle in the middle and final stages of a five-stage turbomolecular pump by considering the effect of returning molecules from other stages using the TPMC method [Volume 2, Issue 1, 2023, Pages 51-65]
  • Thermal analysis Thermal analysis and cooling system design for marine brushless DC motor [Volume 2, Issue 1, 2023, Pages 145-156]
  • Thermal conductivity Development of a New Empirical Model for Predicting Thermal Conductivity of ZnO-Ethylene Glycol Nanofluid Based on Temperature, Particle Size, and Concentration [Volume 4, Issue 2, 2025, Pages 175-189]
  • Thermal efficiency Numerical simulation of EF7 engine in different operating conditions [Volume 2, Issue 2, 2023, Pages 101-109]
  • Thermal Performance Numerical Modeling of the Geometry of Helically Finned Tubes in Shell-and-Tube Heat Exchangers for Enhanced Heat Transfer and Reduced Pressure Drop [(Articles in Press)]
  • Thermodynamic Modeling Advanced Thermodynamic Analysis and Performance Enhancement of Gas Turbine Cycles with Intercooler and Recuperator [(Articles in Press)]
  • Thermoeconomic analysis Thermoeconomics Analysis and Optimization of a Geothermal-Based Power and Heat Generation System Using Genetic Algorithm [Volume 4, Issue 1, 2025, Pages 183-201]
  • Thin film A Review on Heat Transfer Coefficient Measuring Methods in Bulk and Film Specimens [Volume 2, Issue 2, 2023, Pages 57-77]
  • Thinning Experimental investigation of forming AISI 304 stainless steel sheets using high water pressure [(Articles in Press)]
  • Time step Analysis of Mindlin Plates by Dynamic Relaxation Method [Volume 4, Issue 2, 2025, Pages 153-174]
  • Titanium Investigation of the corrosion resistance and hardness of 316L steel with reduced graphene oxide/boron carbide/titanium carbide coating deposited by laser method [(Articles in Press)]
  • Torque Control Performance Evaluation and Torque Control in a Bio-Inspired Flapping-Wing Micro Aerial Vehicle Modeled After a Hummingbird [Volume 4, Issue 1, 2025, Pages 21-46]
  • TPE Numerical Simulation of the Effect of Conventional and Hybrid Nanofluids on the Cooling Performance of Automobile Radiator [Volume 3, Issue 2, 2024, Pages 137-151]
  • Turbomolecular Pump Numerical investigation of the blade angle in the middle and final stages of a five-stage turbomolecular pump by considering the effect of returning molecules from other stages using the TPMC method [Volume 2, Issue 1, 2023, Pages 51-65]
  • Turbulence Reduce Finding the Optimal Position of the Distance Measuring Device with the Aim of Reducing Risk and Uncertainty in the Aircraft Landing Phase [Volume 3, Issue 1, 2024, Pages 227-238]
  • Two-axis Mechanism Design and Construction of a Two-Axis Angle Control Testbed with a Hardware-in-the-Loop Approach [Volume 3, Issue 1, 2024, Pages 147-161]
  • Two-phase flow Prediction and simulation of diffusion of a droplet in a porous media using two-phase control volume [Volume 2, Issue 1, 2023, Pages 27-40]
  • Two-phase flow Investigating the wall temperature on the chimney suction of gas-burning appliances using two-phase flow [(Articles in Press)]
U
  • Uniform temperature distribution Numerical and Experimental study of a new building cooling system based on compression refrigeration cycle [Volume 1, Issue 1, 2023, Pages 126-137]
  • Unsteady Aerodynamics Numerical Analysis of Unsteady Aerodynamic Interference between Two Adjacent Moving objects [Volume 4, Issue 1, 2025, Pages 7-19]
  • Unsupervised Learning Data-driven and unsupervised damage detection in frame structures using deep neural networks [Volume 4, Issue 2, 2025, Pages 65-81]
V
  • Vapor-Compression Chiller؛ Adiabatic Pre-Cooling؛ Electricity Consumption؛ Virtual Water Evaluation of Power Consumption and Virtual Water Use of Air-Cooled Chillers with Adiabatic Pre-Cooling in Three Representative Iranian Climates [Volume 4, Issue 1, 2025, Pages 147-164]
  • Vibration Analysis Design, Evaluation and Construction of a Test Rig For Predicting the Remaining Usefull Life of a Gearbox with a Spur Gear [Volume 3, Issue 2, 2024, Pages 33-46]
  • Volume fraction Development of a New Empirical Model for Predicting Thermal Conductivity of ZnO-Ethylene Glycol Nanofluid Based on Temperature, Particle Size, and Concentration [Volume 4, Issue 2, 2025, Pages 175-189]
  • Vortex Effect of Elliptical Cylinder Arrangement on Turbulent Flow and Heat Transfer in Horizontal Channels [Volume 3, Issue 1, 2024, Pages 73-92]
  • Vortex-finder diameter ratio Numerical Analysis of the Impact of Vortex Finder Diameter Ratio on Cyclone Performance [(Articles in Press)]
W
  • Walking Experimental Analysis of an Orthosis Effect on Human Balance during standing and walking [Volume 1, Issue 1, 2023, Pages 138-144]
  • Wall temperature Investigating the wall temperature on the chimney suction of gas-burning appliances using two-phase flow [(Articles in Press)]
  • Warm ECAP process Evaluation of mechanical properties of ultrafine-grained pure titanium produced via warm ECAP process by concurrently utilizing casing and back pressure [Volume 4, Issue 2, 2025, Pages 47-63]
  • Waste heat recovery Energy and exergy analysis of the organic Rankine cycle used for recovering waste heat from the cement industry [Volume 2, Issue 1, 2023, Pages 7-25]
  • Waste heat recovery Investigating the sustainability of diesel, biodiesel and hydrogen fuels in diesel engines with the approach of sustainable development analysis [Volume 2, Issue 1, 2023, Pages 101-113]
  • Waste heat recovery Entropy generation minimization of confined nanofluids laminar flow around a block [Volume 2, Issue 1, 2023, Pages 77-85]
  • Water Jet Experimental investigation of forming AISI 304 stainless steel sheets using high water pressure [(Articles in Press)]
  • Wearable orthoses Experimental Analysis of an Orthosis Effect on Human Balance during standing and walking [Volume 1, Issue 1, 2023, Pages 138-144]
  • Wear Properties Investigation of the Effect of Diamond Additive Percentage on the Mechanical and Wear Properties of Bronze-Diamond Composite for Use in Industries [Volume 4, Issue 2, 2025, Pages 7-25]
  • Window coil system Numerical and Experimental study of a new building cooling system based on compression refrigeration cycle [Volume 1, Issue 1, 2023, Pages 126-137]
  • Workability Experimental investigation of workability of age-hardened Aluminum 7075 in ECAP process [(Articles in Press)]